IK Multimedia

5″ ultralight coated paper mid-woofer
1.5″ high output, low distortion chambered textile dome tweeter
Audiophile, custom-designed Class-D power amplifiers
135 W total RMS power
Max SPL, peak, pair, music, 1 m: 114.5 dBA
Complete DSP controlled system, 96 kHz sampling rate
46 Hz to 30 kHz frequency response +/- 1 dB
39 Hz low frequency extension @-4 dB
Phase response: Coherent, 0/+20° max from 150 Hz up
Phase rotation at 100Hz (with high pass filter off): 50° max
Directivity (Vertical – all voices): +/-50°
Directivity (Vertical – Wide Dispersion mode): +70°/-50°
Continuous, long term SPL free field, 1 m distance, one speaker, fullband pink noise: 98.5 dB(A)
Peak SPL free field, 1 m distance, one speaker, fullband pink noise: 104.5 dB(A)
Peak SPL, half space, 1 m distance, one speaker, fullband pink noise: 106.5 dB(A)
Maximum peak SPL, per pair, 1 m distance, music program: 114.5 dB(A)
Crossover frequency: 2.1 kHz
Crossover type: 8th order, linear phase
LF Power amp (short term): 110 W
HF Power amp (short term): 25 W
Power amps distortion at nominal power: 0.005%
Total latency or TOF: 2.5 ms
Adjustable additional delay: 0-10 ms
High pass filter: off, 35, 50, 65, 80 Hz
LF contour: from -10 to +6 dB
Desk contour: from -10 to 0 dB
Mid contour: from -4 to +4 dB
HF contour: from -6 to +6 dB
Sentitivity: -4 dBu / 88 dBSPL
Input gain trim: +/-5 dB
Unit to unit consistency: +/-0.5 dB
Operating temperature (non condensing): from 0 to 35 °C
Coherent time response across the audio spectrum
High performance vented design
Built-in ARC room calibration
X-MONITOR technology
Remote control for X-MONITOR voice selection and measurement process control
X-MONITOR macOS and Windows control software
Handcrafted in Italy
Dimension and weight
(H x W x D): 296 mm/11.65″ x 177 mm/6.96″ x 223 mm/9.17″
6.1 kg/13.4 lbs.
Package includes
1 x iLoud Precision 5 monitor
Power cord
ARC Microphone
ARC Microphone clamp
USB-B to USB-A 2.5 m/8.2 ft. cable
1 x kit of 4 iLoud Isolation Pods

Type: 2-Way/3-speakers bi-amped, digitally controlled studio monitor
LF Drivers: 2 x 3.5″ polypropylene custom made mid-woofers
HF Driver: 1″ low distortion, back chambered silk dome tweeter
Acoustic Design: DSP tuned bass reflex
Number of amps per speaker: 2
Amplifiers type: High efficiency Class-D
Total power: 100W RMS
LF power: 70W RMS
HF power: 30W RMS
Crossover Type: Linear Phase Variable Order
Crossover Frequency: 3.1kHz
Frequency response: from 50 Hz to 24 kHz +/- 2dB (40 Hz -6dB when uncal, -3 dB when cal)
Phase response: System remains coherent within +/- 15° from 200Hz to 20kHz
Sensitivity at +4dBu: 0dBu signal generates a 100 dB SPL @ 1 m
Sensitivity at -10dBV: -11dBu signal generates a 100 dB SPL @ 1 m
Maximum SPL @ 1m, one speaker playing, on axis: 103dB from 200Hz up sine wave, 95dB at 100Hz sine, 93dB pink noise
Placement setup: Manual switches for LF Extension, LF trim, HF trim, Desk position
LF extension: switch Sets -3dB point of the frequency response at 40, 50 or 60 Hz
LF switch: Low shelf, +2dB or -3dB from 100Hz down
HF switch: high shelf, +2dB or -2dB from 8kHz up
Desk switch: -4dB at 160Hz and +1dB at 1.8kHz
Calibration: Fully automatic and built-in digital calibration, microphone included
Measurement Microphone: Omnidirectional, Mems based precision measurement microphone
Full DSP control
Connectors: 1x combo XLR-1/4? TRS balanced input; 1/8? TS ARC microphone input, 1 x USB type-B (service use only), AC POWER socket
Power requirement: 90 to 240 V AC, auto-ranging, 50 or 60Hz, 120W max power consumption