TOA
-
TOA N-8000EX NETWORK INTERCOM EXCHANGE
The IP Intercom Exchange uses packet audio technology to permit connection of up to sixteenN-8000 Series stations, and features two outputs for public address paging. Simultaneous hands-free conversation is possible between stations. Moreover, the exchange is equipped with a networking interface, allowing up to 80 exchanges to be connected over a network using additional IP intercom exchanges. The Exchange can be mounted in an EIA standard rack(1-unit size) or to a wall using the supplied bracket.€6.820,00TOA N-8000EX NETWORK INTERCOM EXCHANGE
€6.820,00Available in more than 30 days
-
TOA D-2008SP DIGITAL MIXING PROCESSOR UNIT
The D-2008SP Digital Mixing Processor Unit is designed to have up to 32 audio inputs and outputs in total, and to be mounted in an EIA standard equipment rack (3U size). A built-in powerful signal processing function permits the unit to be used as both a mixer and a signal processor. Its audio input/output and control ports can accept optional plug-in modules, making the unit have a maximum of 32 inputs or 32 outputs and up to 2 control modules. Using the following optional modules enables the unit to perform their functions: Two D-983s for providing a maximum of 48 contact inputs and 32 contact outputs, D-984VC for VCA control, and D-2000CB for audio data transfer between multiple D-2008SP units. Each function is set by the dedicated setting software on a PC. Setting contents can be stored in the unit’s internal memory as preset memory, which can be recalled by the D-2008SP without using a PC. The D-2012C, when connected, remotely controls the D-2008SP’s basic operations such as volume control.€6.200,00Available in more than 30 days
-
TOA D-2012C REMOTE CONSOLE UNIT
The D-2012C is a 6U rack mountable Remote Console Unit designed for exclusive use with the D-2008SP Digital Mixing Processor Unit. Assigned to any desired channels inside the D-2008SP by the dedicated software, the D-2012C’s 12 motorized faders and 8 rotary encoders can remotely adjust their volumes. Desired preset memories can be recalled using 8 function keys. It is equipped with 1 channel line input (stereo), which allows the audio signal to be transmitted to the D-2008SP via monitor bus. Audio signals inside the D-2008SP can be monitored via monitor bus through headphones connected to a stereo headphone output. The D-2012C can be installed on a desk with the additional use of an optional D-2012AS Console Case.€5.580,00TOA D-2012C REMOTE CONSOLE UNIT
€5.580,00Available in more than 30 days
-
TOA VX-3000DS POWER SUPPLY MANAGER
The VX-3000DS is an Emergency Power Supply Manager used for the SX-2000, VX-2000 and VM-3000 systems. It is a 3U rack-mount unit equipped with a battery charger and dual switching power supplies, which contribute to rack space, energy-saving and lightweight design. The VX-3000DS features easy maintenance as function setting switch and shutdown switch inside the front panel, and fuse replacement can be performed on the unit’s rear side.€4.836,00TOA VX-3000DS POWER SUPPLY MANAGER
€4.836,00Available in more than 30 days
-
TOA M-864D DIGITAL STEREO MIXER
The M-864D is a 4U rack mountable Digital stereo mixer having 8 monaural Mic/Line input channels and 7 stereo input channels, 6 output channels including 4 bus assignable monaural output channels and 1 stereo recording output channel. It is equipped with digital signal processing functions such as Automatic Resonance Control function (ARC(*1)), Feedback Suppressor function (FBS), Automatic stereo input mute function (AUTO MUTE or Ducker), and Equalizer. Advanced acoustic compensation can be automatically performed without using an acoustic measuring instruments. Furnished with various function setting buttons and 14 analog volume faders, the M-864D can be operated without the need or use of a PC. However, it can also be operated by connecting the PC or optional Remote control panel. It can be mounted in an EIA standard component rack (4U size).
(*1) Automatic Resonance Control function automatically creates an appropriate equalization curve based on measuring the acoustic characteristics inherent in an architectural space, thus improving sound clarity.€4.712,00TOA M-864D DIGITAL STEREO MIXER
€4.712,00Available in more than 30 days
-
TOA VP-3504 POWER AMPLIFIER 4x500W/100V 4 INPUT
The VP-3504 is an Digital Power Amplifier used for the SX-2000, VX-2000 and VM-3000 systems. It is a 2U rack-mount unit equipped with 4 channels of class-D digital power amplifiers, which contribute to energy-saving and lightweight design. The VP-3504 also features a front-mounted LED indicator for operating status indication and stand-by mode to be set for reducing stand-by power consumption. It requires a dedicated power supply unit VX-3000DS.€4.464,00Available in more than 30 days
-
TOA VX-3016F VOICE EVACUATION FRAME 2AB
The VX-3016F is a device designed to control the Voice evacuation announcements of TOA’s VX-3000 Series rack-mount type voice evacuation system.It has audio input terminals and can output the amplified audio signals to the speaker lines when the optional power amplifier modules are mounted.Compatible with network, the system can be configured in distributed arrangement.Indicators that show such statuses as fault status and power amplifier signal status are provided.It has 16 speaker output channels. The number of mountable amplifier modules is up to 2 when used as zone amplifiers or a total of 2 when one is used as standby amplifier and the other as zone amplifier. When one module for zone amplifier use is mounted, the VX-3016F can be used as 1-bus/16-zone output speaker selector. When 2 modules for zone amplifier use are mounted, it can be used as 2-channel 1-bus/8-zone output speaker selector.Zones can be expanded by connecting the unit having amplifier module(s) and the one having no amplifier module.As the VX-3016F is equipped with Standby amplifier input/output terminal, the standby amplifier, when mounted, can be shared among VX-3000F units.€4.340,00TOA VX-3016F VOICE EVACUATION FRAME 2AB
€4.340,00Available in more than 30 days
-
TOA SX-2000SM SYSTEM MANAGER
The SX-2000SM System Manager is designed for use in TOA’s Matrix System and can be mounted in an EIA Standard component rack (1-unit size). It can be used in combination with an optional audio input unit audio output unit and remote microphone of the SX-2000 Series to make up a complete matrix system and can perform audio signal routing and priority control for the entire system. The SX-2000SM itself is equipped with 8 control inputs, 8 control outputs, failure status outputs, failure data inputs/switches, access indicators, mode indicators and failure indicators enabling a wide range of controls and status monitoring. Control input line failure can be detected by connecting resistors to its line. The SX-2000SM has a function to supply a stabilized 24 V DC. Each control can be performed by way of a CF card inserted into the SX-2000SM unit. Operations of the entire system can be recorded and their contents stored on a CF card as an operation log. The SX-2000SM also features two power inputs making possible the creation of a dual-redundant power system. Equipped with two channels of interfaces for connecting to the Emergency Power Supply units, making it possible to configure the system to operate during a power failure.€4.154,00TOA SX-2000SM SYSTEM MANAGER
€4.154,00Available in more than 30 days
-
TOA VX-3008F VOICE EVACUATION FRAME 3AB
The VX-3008F is a device designed to control the Voice evacuation announcements of TOA’s VX-3000 Series rack-mount type voice evacuation system.It has audio input terminals and can output the amplified audio signals to the speaker lines when the optional power amplifier modules are mounted.Compatible with network, the system can be configured in distributed arrangement.Indicators that show such statuses as fault status and power amplifier signal status are provided.It has 8 speaker output channels. A total of 3 power amplifier modules (2 for zone amplifier use and 1 for standby amplifier use) can be mounted. Equipped with a matrix output, the VX-3008F can be used as 2-bus speaker selector using 2 power amplifiers. Setting the matrix output destination makes 1-bus and 2-bus zones coexist. Zones can be expanded by connecting the unit having amplifier module(s) and the one having no amplifier module.As the VX-3008F is equipped with Standby amplifier input/output terminal, the standby amplifier, when mounted, can be shared among VX-3000F units.€3.844,00TOA VX-3008F VOICE EVACUATION FRAME 3AB
€3.844,00Available in more than 30 days
-
TOA SR-C15BWP SUB, 450W, 15”, 8Ω, 93dB
The SR-C15BWP Sub-woofer system is designed to be used in conjunction with the SR-C8LWP or SR-C8SWP Line Array Speaker. Recommended digital processor is the DP-0206 (optional).€3.844,00TOA SR-C15BWP SUB, 450W, 15”, 8Ω, 93dB
€3.844,00Available in more than 30 days
-
TOA D-901 MODULAR DIGITAL MIXER
The D-901 is a 19-type rack-mounted (3U high) digital mixer configured with 12 inputs, 8 buses, and 8 outputs. It features signal processing functions necessary for sound systems such as feedback suppression and auto-mixing. Modular construction permits flexible configuration of inputs and outputs, from 2-IN/4-OUT to 12-IN/8-OUT systems. All functional parameters can be set at the unit. Settings can be stored in the unit’s internal memory as “preset memory” and can be recalled using the front panel-mounted operation keys.Spec Power Source AC mains
Frequency Response 20 – 20,000Hz, ±1dB
Input Max. 12 channels, modular construction
Output Max. 8 channels, modular construction
Signal Processing Feedback Suppression Function, Auto Mixing Function, Auto Mixing Group, Equalizer / Filter, Compressor/Auto-Leveler, Delay, Matrix, Crosspoint Gain
Preset memory 16
Control RS-232C, D-sub connector (9 pins), Remote control module (option)€3.844,00TOA D-901 MODULAR DIGITAL MIXER
€3.844,00Available in more than 30 days
-
TOA VX-3004F VOICE EVACUATION FRAME 4AB
The VX-3004F is a device designed to control the Voice evacuation announcements of TOA’s VX-3000 Series rack-mount type voice evacuation system.It has audio input terminals and can output the amplified audio signals to the speaker lines when the optional power amplifier modules are mounted.Compatible with network, the system can be configured in distributed arrangement.Indicators that show such statuses as fault status and power amplifier signal status are provided.It has 4 speaker output channels, each of which is provided with A and B lines to enable duplication of the speaker lines. Up to 4 power amplifier modules can be mounted.The 4-channel amplifier can be used either for zone output or standby use.As the VX-3004F is equipped with Standby amplifier input/output terminal, the standby amplifier, when mounted, can be shared among VX-3000F units.€3.534,00TOA VX-3004F VOICE EVACUATION FRAME 4AB
€3.534,00Available in more than 30 days
-
TOA SR-C8SWP 2 WAYS SPEAKER, 360W, 8”, 16Ω, 98dB
The SR-C8SWP is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.€3.472,00Available in more than 30 days
-
TOA SR-C8LWP 2 WAYS SPEAKER, 360W, 8”, 16Ω, 98dB
The SR-C8LWP is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.€3.472,00Available in more than 30 days
-
TOA VP-3304 POWER AMPLIFIER 4x300W/100V 4 INPUT
The VP-3304 is an Digital Power Amplifier used for the SX-2000, VX-2000 and VM-3000 systems. It is a 2U rack-mount unit equipped with 4 channels of class-D digital power amplifiers, which contribute to energy-saving and lightweight design. The VP-3304 also features a front-mounted LED indicator for operating status indication and stand-by mode to be set for reducing stand-by power consumption. It requires a dedicated power supply unit VX-3000DS.€3.348,00Available in more than 30 days
-
TOA N-8000RS SUB STATION INTERFACE UNIT
The N-8000RS is a Sub-station interface unit designed for use with TOA’s packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. Up to 16 sub-stations can be connected using 2-core shielded cables. The number of LAN-connected N-8000 system components such as the N-8000RS and IP intercom exchanges is 192 maximum in total. Connecting the unit to the LAN permits the sub-station to make calls to the IP station and receive paging calls through the IP intercom exchange. It can be mounted in an EIA equipment rack (1U size) with the use of an accessory rack mounting bracket or installed on a wall using an optional wall mounting bracket.€3.100,00TOA N-8000RS SUB STATION INTERFACE UNIT
€3.100,00Available in more than 30 days
-
TOA VM-3360VA MIXER AMPLIFIER 5 INPUTS 360W/100V 6 ZONES
The VM-3360VA is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with audio inputs including the background music input, and the speaker output section which has an internal attenuator and 5-output selector. It permits not only general-purpose broadcast, but also Emergency Broadcast based on the EN60849 Standard which gives pre-recorded voice instructions in the emergency situation. Broadcast can be made from an optional RM-300MF Remote Microphone as well as from the amplifier, and can be remotely controlled from external equipment. In addition, the unit features the surveillance function which automatically checks the system for failures.€2.976,00Available in more than 30 days
-
TOA DA-550F POWER AMPLIFIER 4x550W 4Ω
The new DA Series digital multi-channel amplifiers are the latest addition to the TOA line of industry-standard audio products for installed sound. The DA Series is ideal for multi-zone distributed speaker systems and professional sound applications.Engineered with Class D technology, the new DA Series amplifiers operate at 85 percent efficiency and consume almost one-third less power than conventional analog amplifiers. The compact and lightweight (14.6 lbs.) single rack-space design and ultra-low heat dissipation allow designers to rack-mount up to five units without open space between units.
FEATURES :
DA-500FH
4x 500 Watts (100V)
2x 1000W bridged mode (100V)
Limiter and High pass filterDA-550F
4x 550W (8 ohms)
2x 1000W bridged mode (8 ohms)
Limiter
4x 350W (8 ohms) / 4x 550W (8 ohms) /4x 700W (16 ohms) 2x 1100W bridged mode (8 ohms)
Limiter
Class D design – 85% efficient!
30% lower power consumption than conventional amplifiers
Compact, 2U rack-space design
Stack up to 5 units without open spaces between units
Lightweight (9kg)
Independent power supply for each channel
Low heat dissipation
Recessed stepped attenuators
Comprehensive protection circuitry
Removable dust filters for easy maintenance
Optional isolation transformer, model MT-251h (DA-550FH only)For full information click on the pdf below
€2.976,00TOA DA-550F POWER AMPLIFIER 4x550W 4Ω
€2.976,00Available in more than 30 days
-
TOA DA-500FH POWER AMPLIFIER 4x500W/70V
The DA-500FH is a 4-Channel Digital Power Amplifier designed for 100 V line high-impedance distribution and features lightweight, compact, high power output, and high efficiency. It delivers 500 W x 4 channels (20 ohms output) using a switching power supply. Each channel is equipped with an independent power section. It can be electrically isolated from the high-impedance speaker system by attaching the MT-251H Output Transformer (optional). It can be mounted in an EIA Standard equipment rack (2 unit size)Spec Power Requirement 220 – 240 V AC, 50/60 Hz
Number of Channels 4
Total Output 2000 W (1 kHz, 20 Ohm: 100 V line)
Power Output 500 W (Hi-Z: 100V per channel )Rated power consumption 2300 W, 16.8 A (100 Volt)
Frequency response 50 Hz – 20 kHz (-3 dB, +1 dB)
THD 0.1 % (1 kHz) / 0.3 % (20 Hz – 20 kHz)
S/N Ratio (A weighted) 100 dB
Crosstalk at 10kHz (A weighted) 70 dB
DC Offset ±5 mV
Voltage Gain 38.2 dBDamping Factor 240 (1 kHz, 20 Ohm: 100 V line)
Inputs Input impedance 10 kOhm (unbalanced), 20 kOhm (balanced)
Input sensitivity +4 dB (1.23 V)
Input clipping 12 V (25.1 dBu)
Protection Circuit Amplifier section: DC output, overheat protection, load shorting, overload current, maximum output / Power supply section: Overheat protection, AC rush current
Cooling Continuously constant speed fan with front-to-rear airflow, 100,000 hours life time at 25°C
Operating Temperature 10°C to +40°C
Operating Humidity Under 90% RH (no condensation)
Dimensions 482 (W) 88.4 (H) 404.2 (D) mmWeight 9 kg
Finish Panel: Aluminum, alumite process, black/Case: Plated steel sheetOption Matching transformer: MT-251H
€2.976,00TOA DA-500FH POWER AMPLIFIER 4x500W/70V
€2.976,00Available in more than 30 days
-
TOA SR-C8S 2 WAYS SPEAKER, 360W, 8”, 16Ω, 98dB
The SR-C8S is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.€2.728,00Available in more than 30 days
-
TOA SR-C8L 2 WAYS SPEAKER, 360W, 8”, 16Ω, 98dB
The SR-C8L is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.€2.728,00Available in more than 30 days
-
TOA N-8400RS SUB-STATION INTERFACE UNIT
The N-8400RS is a Sub-station interface unit designed for use with TOA’s packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. Up to 16 sub-stations can be connected using 2 sets of twisted pair cables. The number of LAN-connected N-8000 system components such as the N-8400RS and IP intercom exchanges is 192 maximum in total. Connecting the unit to the LAN permits the sub-station to receive paging calls and make calls to both the master station connected to the IP intercom exchange and the IP master station. It can be mounted in an EIA equipment rack (1U size) with the use of an accessory rack mounting bracket or installed on a wall using an optional wall mounting bracket.€2.666,00TOA N-8400RS SUB-STATION INTERFACE UNIT
€2.666,00Available in more than 30 days
-
TOA VM-3360E EXTENTION AMPLIFIER 360W FOR VM-3000
The VM-3360E is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with the speaker output section which has an internal attenuator and 5-output selector. In addition, the unit features the surveillance function which automatically checks the system for failures.€2.666,00Available in more than 30 days
-
TOA VM-3240VA MIXER AMPLIFIER 5 INPUTS 240W/100V 6 ZONES
The VM-3240VA is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with audio inputs including the background music input, and the speaker output section which has an internal attenuator and 5-output selector. It permits not only general-purpose broadcast, but also Emergency Broadcast based on the EN60849 Standard which gives pre-recorded voice instructions in the emergency situation. Broadcast can be made from an optional RM-300MF Remote Microphone as well as from the amplifier, and can be remotely controlled from external equipment. In addition, the unit features the surveillance function which automatically checks the system for failures.€2.542,00Available in more than 30 days