Aria

  • IK Multimedia ARC Studio

    ARC Studio delivers the power of the ARC System for more studios in more places.
    For pro studios, whether digital or analogue console-based, ARC Studio allows for correction and custom-tuning for any setup while the inherent system’s sonic quality.
    For DAW-based studios, ARC Studio frees you from the hassle of inserting plug-ins on the master bus of your work and preserves zero-latency monitoring setups.
    You can customize your setup for ideal performance no matter your preference, with adjustable upper and lower correction limits, variable resolution and smoothing, and both natural and linear phase modes.

    IK Multimedia ARC Studio

    279,00307,00

    Διαθέσιμο σε 1-3 ημέρες

  • Aria AWN-15 Blue Shade

    Top: SpruceBack & Side: MerantiNeck: NatoFingerboard: IronwoodNumber of Frets: 20Scale Length: 650mmBridge: IronwoodHardware: ChromeElectronics: Aria MG-30 (3-band EQ with tuner)

    Aria AWN-15 Blue Shade

    135,00150,00

    Διαθέσιμο σε 1-3 ημέρες

  • Aria AWN-15 Orange

    Top: SpruceBack & Side: MerantiNeck: NatoFingerboard: IronwoodNumber of Frets: 20Scale Length: 650mmBridge: IronwoodHardware: ChromeElectronics: Aria MG-30 (3-band EQ with tuner)

    Aria AWN-15 Orange

    135,00150,00

    Διαθέσιμο σε 1-3 ημέρες

  • Aria Pro II 313-MK2/5 Detroit Open-Pore Natural 5-String

    Body: Ash
    Neck: Roasted Maple, Heel-less Bolt-on
    Fingerboard: Rosewood
    Number of Frets: 24
    Scale Length: 864mm
    Pickups:* Neck: PV-5 (Alnico-5)* Bridge: JV-5 (Alnico-5)
    Controls: Volume, Tone, Balancer
    Tailpiece: Wilkinson
    Hardware: Chrome

    Διαθέσιμο σε 1-3 ημέρες

  • Aria Pro II 615-MK2 Black Diamond

    Body: Poplar, Flamed Maple Top
    Neck: Roasted Maple, Heel-less Bolt-on
    Fingerboard: Roasted Maple
    Number of Frets: 22
    Scale Length: 648mm (25-1/2″)
    Pickups:* Neck: TN-5 (Alnico 5)* Middle: OS-5 (Alnico 5) – on/off on tone knob (Push/Pull)* Bridge: TB-5 (Alnico 5)
    Controls: Volume, Tone, 3-way PU Selector SW
    Tailpiece: Wilkinson
    Hardware: Chrome

    Διαθέσιμο σε 1-3 ημέρες

  • Aria Pro II TEG Series Black with Red Tortoise Pickguard

    Body: Basswood
    Neck: Maple, Bolt-on
    Fingerboard: Rosewood
    Number of Frets: 22
    Scale Length: 648mm (25-1/2″)
    Pickups: CS-1 Single Coil, OS-1 Single Coil
    Controls: Volume x 1, Tone x 1, 3-position PU Selector Switch
    Tailpiece: VTL-1
    Hardware: Chrome
    Finishes: BK (Black with Red Tortoise Pickguard)

    Διαθέσιμο σε 1-3 ημέρες

  • Aria Pro II STG-MINI Black

    Body: Basswood
    Neck: Maple, Bolt-on
    Fingerboard: Rosewood
    Number of Frets: 22
    Scale Length: 580mm (22-7/8”)
    Pickups: OS-3 Single Coil x 3
    Controls: Volume x 1, Tone x 1, PU Selector Switch x 1
    Tailpiece: VFT-1 Tremolo
    Hardware: Chrome

    Aria Pro II STG-MINI Black

    152,00169,00

    Διαθέσιμο σε 1-3 ημέρες

  • IK Multimedia iLoud Precision 6 Black

    6.5″ ultralight coated paper mid-woofer
    1.5″ high output, low distortion chambered textile dome tweeter
    Audiophile, custom-designed Class-D power amplifiers
    150 W total RMS power
    Max SPL, peak, pair, music, 1 m: 116 dB
    Complete DSP controlled system, 96 kHz sampling rate
    45 Hz to 30 kHz frequency response +/- 1 dB
    37 Hz low frequency extension @-4 dB
    Phase response: Coherent, 0/+20° max from 150 Hz up
    Phase rotation at 100Hz (with high pass filter off): 45° max
    Directivity (Vertical – all voices): +/-50°
    Directivity (Vertical – Wide Dispersion mode): +65°/-50°
    Continuous, long term SPL free field, 1 m distance, one speaker, fullband pink noise: 100 dB(A)
    Peak SPL free field, 1 m distance, one speaker, fullband pink noise: 106 dB(A)
    Peak SPL, half space, 1 m distance, one speaker, fullband pink noise: 108 dB(A)
    Maximum peak SPL, per pair, 1 m distance, music program: 116 dB(A)
    Crossover frequency: 1.9 kHz
    Crossover type: 8th order, linear phase
    LF Power amp (short term): 120 W
    HF Power amp (short term): 30 W
    Power amps distortion at nominal power: 0.005%
    Total latency or TOF: 2.5 ms
    Adjustable additional delay: 0-10 ms
    High pass filter: off, 35, 50, 65, 80 Hz
    LF contour: from -10 to +6 dB
    Desk contour: from -10 to 0 dB
    Mid contour: from -4 to +4 dB
    HF contour: from -6 to +6 dB
    Sentitivity: -4 dBu / 90 dBSPL
    Input gain trim: +/-5 dB
    Unit to unit consistency: +/-0.5 dB
    Operating temperature (non condensing): from 0 to 35 °C
    Coherent time response across the audio spectrum
    High performance vented design
    Built-in ARC room calibration
    X-MONITOR technology
    Remote control for X-MONITOR voice selection and measurement process control
    X-MONITOR macOS and Windows control software
    Handcrafted in Italy
    Dimension and weight
    (H x W x D): 353 mm/13.89″ x 201 mm/7.91″ x 282 mm/11.10″
    7.7 kg/17 lbs.
    Package includes
    1 x iLoud Precision 6 monitor
    Power cord
    ARC Microphone
    ARC Microphone clamp
    USB-B to USB-A 2.5 m/8.2 ft. cable
    1 x kit of 4 iLoud Isolation Pods

    Διαθέσιμο σε 1-3 ημέρες

  • IK Multimedia iLoud Precision 5

    5″ ultralight coated paper mid-woofer
    1.5″ high output, low distortion chambered textile dome tweeter
    Audiophile, custom-designed Class-D power amplifiers
    135 W total RMS power
    Max SPL, peak, pair, music, 1 m: 114.5 dBA
    Complete DSP controlled system, 96 kHz sampling rate
    46 Hz to 30 kHz frequency response +/- 1 dB
    39 Hz low frequency extension @-4 dB
    Phase response: Coherent, 0/+20° max from 150 Hz up
    Phase rotation at 100Hz (with high pass filter off): 50° max
    Directivity (Vertical – all voices): +/-50°
    Directivity (Vertical – Wide Dispersion mode): +70°/-50°
    Continuous, long term SPL free field, 1 m distance, one speaker, fullband pink noise: 98.5 dB(A)
    Peak SPL free field, 1 m distance, one speaker, fullband pink noise: 104.5 dB(A)
    Peak SPL, half space, 1 m distance, one speaker, fullband pink noise: 106.5 dB(A)
    Maximum peak SPL, per pair, 1 m distance, music program: 114.5 dB(A)
    Crossover frequency: 2.1 kHz
    Crossover type: 8th order, linear phase
    LF Power amp (short term): 110 W
    HF Power amp (short term): 25 W
    Power amps distortion at nominal power: 0.005%
    Total latency or TOF: 2.5 ms
    Adjustable additional delay: 0-10 ms
    High pass filter: off, 35, 50, 65, 80 Hz
    LF contour: from -10 to +6 dB
    Desk contour: from -10 to 0 dB
    Mid contour: from -4 to +4 dB
    HF contour: from -6 to +6 dB
    Sentitivity: -4 dBu / 88 dBSPL
    Input gain trim: +/-5 dB
    Unit to unit consistency: +/-0.5 dB
    Operating temperature (non condensing): from 0 to 35 °C
    Coherent time response across the audio spectrum
    High performance vented design
    Built-in ARC room calibration
    X-MONITOR technology
    Remote control for X-MONITOR voice selection and measurement process control
    X-MONITOR macOS and Windows control software
    Handcrafted in Italy
    Dimension and weight
    (H x W x D): 296 mm/11.65″ x 177 mm/6.96″ x 223 mm/9.17″
    6.1 kg/13.4 lbs.
    Package includes
    1 x iLoud Precision 5 monitor
    Power cord
    ARC Microphone
    ARC Microphone clamp
    USB-B to USB-A 2.5 m/8.2 ft. cable
    1 x kit of 4 iLoud Isolation Pods

    IK Multimedia iLoud Precision 5

    969,001.066,00

    Διαθέσιμο σε 1-3 ημέρες

  • IK Multimedia TONEX Capture

    IK Multimedia’s TONEX Capture is a cutting-edge Tone Model builder, allowing you to effortlessly create a digital profile of any amplifier or pedal’s true-to-life tone! By rigging up the TONEX Capture to your amp and audio interface, you can easily create an IK Multimedia digital Tone Model that replicates every nuance of your amplifier and cab’s (or pedal’s) response, providing you with a software emulation that Sweetwater guitarists find is virtually indistinguishable from the real thing. In addition, the TONEX Capture also doubles as a re-amp box — an essential tool for guitarists and producers looking to audition their direct tracks through a multitude of real-world guitar amps. If you’re looking to dive headfirst into the advanced modelling world of IK Multimedia’s robust TONEX ecosystem, there’s no simpler way to do it than with the TONEX Capture.

    IK Multimedia TONEX Capture

    218,00240,00

    Διαθέσιμο σε 1-3 ημέρες

  • Aria FST-300 Black

    Top: BasswoodBack & Side: BasswoodNeck: CatalpaFingerboard: TechwoodFrets: 20Scale Length: 650mmBridge: Stained WalnutFinish: N (Natural)

    Aria FST-300 Black

    149,00165,00

    Διαθέσιμο σε 1-3 ημέρες

  • Aria FST-300 Sunburst

    Top: Basswood
    Back & Side: Basswood
    Neck: Catalpa
    Fingerboard: Techwood
    Frets: 20
    Scale Length: 650mm
    Bridge: Stained Walnut
    Finish: Sunburst

    Aria FST-300 Sunburst

    149,00165,00

    Διαθέσιμο σε 1-3 ημέρες

  • Aria FST-300 Natural

    Top: BasswoodBack & Side: BasswoodNeck: CatalpaFingerboard: TechwoodFrets: 20Scale Length: 650mmBridge: Stained WalnutFinish: N (Natural)

    Aria FST-300 Natural

    149,00165,00

    Διαθέσιμο σε 1-3 ημέρες

  • Aria FST-200 1/2 Black with Gig Bag

    Top: BasswoodBack & Sides: BasswoodNeck: NatoNumber of Frets: 19FScale Length: 650mmColour: Black

    Διαθέσιμο σε 1-3 ημέρες

  • Aria FST-200 3/4 Natural with Gig Bag

    Top: BasswoodBack & Sides: BasswoodNeck: NatoNumber of Frets: 19FColour: Black

    Διαθέσιμο σε 1-3 ημέρες

  • Aria FST-200 Blue Sunburst with Gig Bag

    Top: BasswoodBack & Sides: BasswoodNeck: NatoNumber of Frets: 19FScale Length: 650mmColour: Black

    Διαθέσιμο σε 1-3 ημέρες

  • Aria FST-200 Black with Gig Bag

    Top: BasswoodBack & Sides: BasswoodNeck: NatoNumber of Frets: 19FScale Length: 650mmColour: Black

    Διαθέσιμο σε 1-3 ημέρες

  • Aria FST-200 Natural with Gig Bag

    Top: BasswoodBack & Sides: BasswoodNeck: NatoNumber of Frets: 19FScale Length: 650mmColour: Black

    Διαθέσιμο σε 1-3 ημέρες

  • Aria AK-25 Natural

    162,00180,00

    Διαθέσιμο σε 1-3 ημέρες

  • IK Multimedia iRig Pro Quattro I/O Deluxe

    Microphone Inputs 1-2
    2 x balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
    Input impedance: 1 kOhms
    Input level, min gain: 0 dBFS is obtained with a -1.5 dBu signal at the XLR input
    Input level, max gain: 0 dBFS is obtained with a -55 dBu signal at the XLR input
    Frequency response: from 10 Hz to 46 kHz within 3 dB (96 kHz sample rate), min gain
    Dynamic Range: 103 dB(A), min gain
    Phantom power: 48V / -4V
    Built-in microphone
    Type: MEMS
    Polar pattern: omnidirectional
    Frequency response: from 30 Hz to 20 kHz
    Max SPL: 110 dBSPL
    Sensitivity: -41.5 dB (1 kHz, 94dB SPL)
    Instrument Inputs 1-2
    2 x unbalanced, Hi-Z, TS 1/4” Jack, Tip: signal / Shield: ground
    Input impedance: 1 MOhms
    Input level, min gain: 0 dBFS is obtained with a +10 dBu signal at the TS input
    Input level, max gain: 0 dBFS is obtained with a -43 dBu signal at the TS input
    Frequency response: from 7 Hz to 46 kHz within 3 dB (96 kHz sample rate), min gain
    Dynamic range: 103 dB(A), min gain
    Microphone Inputs 3-4
    2 x balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
    Input impedance: 1 kOhms
    Input level, min gain: 0 dBFS is obtained with a -3 dBu signal at the XLR input
    Input level, max gain: 0 dBFS is obtained with a -54 dBu signal at the XLR input
    Frequency response: from 10 Hz to 46 kHz within 3 dB (96 kHz sample rate), min gain
    Dynamic range: 101 dB(A), min gain
    Phantom power: 48V / -4V
    Line Inputs 3-4 (balanced)
    2 x balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
    Input impedance: 1 kOhms
    Input level, min gain: 0 dBFS is obtained with a -3 dBu signal at the XLR input
    Input level, max gain: 0 dBFS is obtained with a -54 dBu signal at the XLR input
    Frequency response: from 10 Hz to 46 kHz within 3 dB (96 kHz sample rate), min gain
    Dynamic range: 101 dB(A), min gain
    Phantom power: 48V / -4V
    Line Inputs 3-4 (unbalanced)
    Unbalanced, TRS 3.5 mm stereo Jack and RCA
    Input impedance: 2.1 kOhms
    Nominal input level: -3.5 dBV (-10 dBV with 6.5 dB of headroom)
    Frequency response: from 16 Hz to 46 kHz within 3 dB (96 kHz sample rate)
    Dynamic range: 93 dB(A)
    Line Outputs (balanced)
    2 x balanced, 3-pin XLR, Pin 2: hot / Pin 3: cold / Pin 1: ground
    Floating balanced outputs with automatic level compensation when working in unbalanced mode
    Output impedance: 150 Ohms balanced
    Output level: 0 dBFS corresponds to +12 dBu
    Frequency response: from 5 Hz to 44 kHz within 3 dB (96 kHz sample rate)
    Dynamic range: 100 dB(A)
    Channels crosstalk: 88 dB(A)
    Stereo Output (unbalanced)
    Unbalanced, TRS 3.5 mm stereo jack
    Output impedance: 150 Ohms balanced
    Output level: 0 dBFS corresponds to +12 dBu
    Frequency response: from 5 Hz to 44 kHz within 3 dB (96 kHz sample rate)
    Dynamic range: 100 dB(A)
    Channels crosstalk: 88 dB(A)
    Headphones Output
    TRS 3.5 mm stereo jack
    Output impedance: 22 Ohm
    Output level: 26 mW/channel (32 Ohm load)
    Frequency response: from 15 Hz to 44 kHz within 3 dB (96 kHz sample rate)
    Dynamic range: 100 dB(A)
    Common
    AD and DA Resolution: 24-bit
    Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
    Power: USB bus power, battery power (4 x AA), DC power supply (9VDC) or external USB power supply (5VDC, 1A min)
    Device Connection: Mini-DIN
    Size: 166 mm / 6.54″ x 92 mm / 3.62″ x 43 mm / 1.69″
    Weight: 325 g / 0.72 lb (batteries excluded)
    Battery Life:• Recording – Max load*: 1 hour, 30 minutes (Alkaline); 3 hours (NiMH rechargeable)• Playback – Min load**: 2 hours, 30 minutes (Alkaline); 4 hours (NiMH rechargeable)
    *Max load condition: four inputs connected each to a 1.6mA phantom-powered load, input gains set to maximum, 32 Ohm headphones connected.**Min load condition is as follows: music playing, phantom power OFF, 32 Ohm headphones connected.
    Dimensions
    Size: 166 mm x 92 mm x 43 mm
    Weight: 325 g (batteries excluded)
    Package includes
    iRig Pro Quattro I/O interface
    1/4″ thread adapter
    Lightning to Mini-DIN connection cable (60cm/23.62″)
    USB-C to Mini-DIN connection cable (60cm/23.62″)
    USB-A to Mini-DIN connection cable (60cm/23.62″)
    1x 2.5mm TRS male to MIDI female adapter (10cm/3.9″)
    4 x 1.5V AA Battery
    2 x iRig Mic XY
    Windshield
    Power Supply Unit
    Carrying case

    Διαθέσιμο σε 1-3 ημέρες

  • IK Multimedia iRig Pro Quattro I/O

    Microphone Inputs 1-2
    2 x balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
    Input impedance: 1 kOhms
    Input level, min gain: 0 dBFS is obtained with a -1.5 dBu signal at the XLR input
    Input level, max gain: 0 dBFS is obtained with a -55 dBu signal at the XLR input
    Frequency response: from 10 Hz to 46 kHz within 3 dB (96 kHz sample rate), min gain
    Dynamic Range: 103 dB(A), min gain
    Phantom power: 48V / -4V
    Built-in microphone
    Type: MEMS
    Polar pattern: omnidirectional
    Frequency response: from 30 Hz to 20 kHz
    Max SPL: 110 dBSPL
    Sensitivity: -41.5 dB (1 kHz, 94dB SPL)
    Instrument Inputs 1-2
    2 x unbalanced, Hi-Z, TS 1/4” Jack, Tip: signal / Shield: ground
    Input impedance: 1 MOhms
    Input level, min gain: 0 dBFS is obtained with a +10 dBu signal at the TS input
    Input level, max gain: 0 dBFS is obtained with a -43 dBu signal at the TS input
    Frequency response: from 7 Hz to 46 kHz within 3 dB (96 kHz sample rate), min gain
    Dynamic range: 103 dB(A), min gain
    Microphone Inputs 3-4
    2 x balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
    Input impedance: 1 kOhms
    Input level, min gain: 0 dBFS is obtained with a -3 dBu signal at the XLR input
    Input level, max gain: 0 dBFS is obtained with a -54 dBu signal at the XLR input
    Frequency response: from 10 Hz to 46 kHz within 3 dB (96 kHz sample rate), min gain
    Dynamic range: 101 dB(A), min gain
    Phantom power: 48V / -4V
    Line Inputs 3-4 (balanced)
    2 x balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
    Input impedance: 1 kOhms
    Input level, min gain: 0 dBFS is obtained with a -3 dBu signal at the XLR input
    Input level, max gain: 0 dBFS is obtained with a -54 dBu signal at the XLR input
    Frequency response: from 10 Hz to 46 kHz within 3 dB (96 kHz sample rate), min gain
    Dynamic range: 101 dB(A), min gain
    Phantom power: 48V / -4V
    Line Inputs 3-4 (unbalanced)
    Unbalanced, TRS 3.5 mm stereo Jack and RCA
    Input impedance: 2.1 kOhms
    Nominal input level: -3.5 dBV (-10 dBV with 6.5 dB of headroom)
    Frequency response: from 16 Hz to 46 kHz within 3 dB (96 kHz sample rate)
    Dynamic range: 93 dB(A)
    Line Outputs (balanced)
    2 x balanced, 3-pin XLR, Pin 2: hot / Pin 3: cold / Pin 1: ground
    Floating balanced outputs with automatic level compensation when working in unbalanced mode
    Output impedance: 150 Ohms balanced
    Output level: 0 dBFS corresponds to +12 dBu
    Frequency response: from 5 Hz to 44 kHz within 3 dB (96 kHz sample rate)
    Dynamic range: 100 dB(A)
    Channels crosstalk: 88 dB(A)
    Stereo Output (unbalanced)
    Unbalanced, TRS 3.5 mm stereo jack
    Output impedance: 150 Ohms balanced
    Output level: 0 dBFS corresponds to +12 dBu
    Frequency response: from 5 Hz to 44 kHz within 3 dB (96 kHz sample rate)
    Dynamic range: 100 dB(A)
    Channels crosstalk: 88 dB(A)
    Headphones Output
    TRS 3.5 mm stereo jack
    Output impedance: 22 Ohm
    Output level: 26 mW/channel (32 Ohm load)
    Frequency response: from 15 Hz to 44 kHz within 3 dB (96 kHz sample rate)
    Dynamic range: 100 dB(A)
    Common
    AD and DA Resolution: 24-bit
    Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
    Power: USB bus power, battery power (4 x AA), DC power supply (9VDC) or external USB power supply (5VDC, 1A min)
    Device Connection: Mini-DIN
    Size: 166 mm / 6.54″ x 92 mm / 3.62″ x 43 mm / 1.69″
    Weight: 325 g / 0.72 lb (batteries excluded)
    Battery Life:• Recording – Max load*: 1 hour, 30 minutes (Alkaline); 3 hours (NiMH rechargeable)• Playback – Min load**: 2 hours, 30 minutes (Alkaline); 4 hours (NiMH rechargeable)
    *Max load condition: four inputs connected each to a 1.6mA phantom-powered load, input gains set to maximum, 32 Ohm headphones connected.**Min load condition is as follows: music playing, phantom power OFF, 32 Ohm headphones connected.
    Dimensions
    Size: 166 mm x 92 mm x 43 mm
    Weight: 325 g (batteries excluded)
    Package includes
    iRig Pro Quattro I/O interface
    1/4″ thread adapter
    Lightning to Mini-DIN connection cable (60cm/23.62″)
    USB-C to Mini-DIN connection cable (60cm/23.62″)
    USB-A to Mini-DIN connection cable (60cm/23.62″)
    1x 2.5mm TRS male to MIDI female adapter (10cm/3.9″)
    4 x 1.5V AA Battery

    Διαθέσιμο σε 1-3 ημέρες

  • IK Multimedia USB-C to Micro-USB

    Use this IK Multimedia USB Type-C to Micro-USB Cable with select iRig and UNO products. With a USB Type-C Port at one end, and a micro-USB port at the other, the cable is 1.50m long.

    Διαθέσιμο σε 1-3 ημέρες

  • IK Multimedia iLine Stereo Aux

    24k gold-plated connectors for maximum connectivity
    High-purity copper conductors for optimal signal transfers
    Low-capacitance insulation to preserve transients
    High-density shielding to guard against electromagnetic interference (EMI)
    Compatible with smartphones, tablets, laptops, desktops and most high-end audio equipment
    Made in Italy
    Limited lifetime warranty

    Διαθέσιμο σε 1-3 ημέρες

  • IK Multimedia iLine RCA Output

    24k gold-plated connectors for maximum connectivity
    High-purity copper conductors for optimal signal transfers
    Low-capacitance insulation to preserve transients
    High-density shielding to guard against electromagnetic interference (EMI)

    Διαθέσιμο σε 1-3 ημέρες

Κύριο Μενού Πλοήγησης