AVID

Two-way bi-amplified analogue amp-powered speaker system
15″
heavy-duty woofer
DX™14 compression driver, with a 1.4-inch titanium diaphragm
670 watts peak dynamic woofer power, 330 watts peak dynamic tweeter power
Bluetooth® streaming and pairing are supported
DSP processing is 56-bit double-precision
DSP I/O is at 48 kHz and 24 bits, with low-jitter, professional-grade components
Dynamic bass boost function
Fan-cooled for maximum reliability
Peavey® Designed Quadratic Throat Waveguide™ technology, 110 by 80-degree coverage
Input is via a combo female XLR and 1/4″
TRS phone jack with balanced input OR a Bluetooth ® signal can be streamed to the speaker system.
A Mic/Line switch to accommodate a wide range of input signals
Thru/Mix output is via a male XLR jack
Multiple Factory Preset EQ settings for the DSP crossover system
Rugged plastic injection-molded trapezoidal enclosure
The cabinet has dual rear corner angled sides for floor monitor use.
Full-coverage perforated steel grille, with powder coat finish
Pole mount moulded-in for 1 3/8″
diameter poles
Packed Weight: 22.4 kg
Packed Length: 77.47 cm
Packed Width: 47.94 cm
Packed Height: 44.61 cm

PVXp™ 12 Bluetooth® 12-inch Powered LoudspeakerThe PVXp™ 12 Bluetooth® features a reliable bi-amped power section that provides a total of 980 Watts of peak dynamic power with DSP-based compression and limiting. This enclosure features a 12″ heavy-duty woofer with a 2 3/8″ inch voice coil and 50-ounce magnet, and the RX14™ compression driver with a 1.4-inch titanium diaphragm on a 100-degree horizontal x 50-degree vertical pattern asymmetrical horn. The PVXp™ 12 Bluetooth® provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4″ inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a Bluetooth source, or alternatively a 1/8″ AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. There is a balanced output, a Male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator can be set to light when power is on, and when the “soft-limiting” DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ preset, along with other DSP operating parameters are accessed via a one-knob selector.
Two-way bi-amped sound reinforcement enclosure
RX14™ compression driver, with a 1.4-inch titanium diaphragm
Reliable fan-cooled power amps with DSP protection
Total of 980W peak dynamic power
DSP control for precise crossover, EQ and limiting functions
Bluetooth input is via a dedicated input channel
Mix/Thru Output is via a male XLR jack
Durable plastic injection-moulded trapezoidal enclosure
The extra angled section on the right side allows floor monitor use
Pole mount moulded-in for 1 3/8″ diameter poles
Top, bottom and right side flying point inserts
12 heavy-duty woofer with 2 3/8″ voice coil & 50 oz. magnet
Full-coverage heavy-duty perforated steel grilles, with powder coat finish
DSP I/O is at 48 kHz and 24 bits, internal processing is 56-bit double-precision
Peavey’s Quadratic Throat Waveguide technology, 100 by 50-degree coverage
Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads
Analog input is via a combo female XLR and 1/4″ TRS phone jack with balanced input
Three channels in total, two for analogue, and one for Bluetooth or AUX input via a 1/8 jack
Each channel has a level control and a 3-band EQ section to adjust and shape the input signals

PVXp™ 15 Bluetooth® 15-inch Powered LoudspeakerThe PVXp™ 15 Bluetooth® features a reliable bi-amped power section that provides a total of 980 Watts of peak dynamic power with DSP-based compression and limiting. This enclosure features a 15″ heavy-duty woofer with a 2 3/8 inch voice coil and 50-ounce magnet, and the RX14™ compression driver with a 1.4-inch titanium diaphragm on a 100-degree horizontal x 50-degree vertical pattern asymmetrical horn. The PVXp™ 15 Bluetooth® provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4 inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a Bluetooth source, or alternatively a 1/8″ AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. There is a balanced output, a Male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator can be set to light when power is on, and when the “soft-limiting” DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ preset, along with other DSP operating parameters, are accessed via a one-knob selector.
RX14™ compression driver, with 1.4-inch titanium diaphragm
Reliable fan-cooled power amps with DSP protection
Total of 980W peak dynamic power
DSP control for precise crossover, EQ and limiting functions
Bluetooth input is via a dedicated input channel
Mix/Thru Output is via a male XLR jack
Durable plastic injection-moulded trapezoidal enclosure
The extra angled section on the right side allows floor monitor use
Pole mount moulded-in for 1 3/8″ diameter poles
Top, bottom and right side flying point inserts
15 heavy-duty woofer with 2 3/8″ voice coil & 50 oz. magnet
Full-coverage heavy-duty perforated steel grilles, with powder coat finish
DSP I/O is at 48 kHz and 24 bits, internal processing is 56-bit double-precision
Peavey’s Quadratic Throat Waveguide technology, 100 by 50-degree coverage
Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads
Analog input is via a combo female XLR and 1/4″ TRS phone jack with balanced input
Three channels in total, two for analogue, and one for Bluetooth or AUX input via a 1/8″ jack
Each channel has a level control and a 3-band EQ section to adjust and shape the input signals