Professional Sound

  • SOUNDCRAFT ViSB-BLU VI STAGEBOX IO CARD

    ViSB-BLU is a 1 slot width 32 channel stagebox card, allowing 32 inputs and 32 outputs onto a BSS BLU-LINK network. Note – this is an IO card, not an HD card. There is not control here so this doesn’t replace the MADI card.
    1.364,00

    Available in more than 30 days

  • SOUNDCRAFT SI DANTE CARD DIGITAL DANTE CARD

    Soundcraft SI-Dante Card, Dante Card with 2x RJ45 connectors, fits for SI Compact, Performer, Expression and SI+
    1.512,80

    Available in more than 30 days

  • JBL CONTROL 16CT CEILING SPEAKER 2-WAYS, 100V/8Ω, 6.5”,100W,91dB

    Control 16CT is a full-range ceiling speaker consisting of a 165 mm (6.5 inch) high tech cone driver and a 19mm soft-dome liquid cooled tweeter mounted in a vented, paintable baffle made of UV resistant UL94-V0 and UL94-5HB material, with a pre-attached blindmount backcan for quick and easy installation.

    – Components:
    – 165 mm (6.5 in) high output driver with polypropylene cone
    and butyl rubber surround
    – 19 mm (0.75 in) soft-dome liquid-cooled tweeter
    – Blind-mount backcan for quick and easy install
    – Dual conduit/cable clamps
    – Combined 70V/100V and low impedance direct operation
    – 50 Watts at 8Ω nominal setting
    – 30W multi-tap at 70V/100V
    – 62 Hz – 20 kHz bandwidth with wide 110° coverage
    – High 91 dB sensitivity for high maximum SPL
    – White or black (-BK)

    201,00235,60

    Available in 1-3 days

  • JBL CONTROL 14CT CEILING SPEAKER 2-WAYS, 100V/8Ω, 4”,60W,87dB

    Control 14CT is a full-range ceiling speaker consisting of a 100 mm (4 inch) high tech cone driver and a 19 mm soft-dome liquid cooled tweeter mounted in a vented, paintable baffle made of UV resistant UL94-V0 and UL94-5HB material, with a pre-attached blind-mount backcan for quick and easy installation.

    Components:
    – 100 mm (4.0 in) high output driver with polypropylene cone
    and butyl rubber surround
    – 19 mm (0.75 in) soft-dome liquid-cooled tweeter
    – Blind-mount backcan for quick and easy install
    – Dual conduit/cable clamps
    Combined 70V/100V and low impedance direct operation
    – 30 Watts at 8Ω nominal setting
    – 25W multi-tap at 70V/100V
    – 74 Hz ? 20 kHz bandwidth with wide 120° coverage
    – White or black (-BK)

    153,00179,80

    Available in more than 30 days

  • JBL CONTROL 12CT CEILING FULLRANGE SPEAKER, 100V/8Ω, 3”,40W,84dB

    Control 12CT is a full-range ceiling speaker consisting of 76 mm (3 inch) wide-bandwidth cone driver mounted in a vented, paintable baffle made of UV resistant UL94-V0 material, with a preattached blind-mount backcan for quick and easy installation.

    – 76 mm (3 in) full-range driver
    – Blind-mount backcan for quick and easy install
    – Dual conduit/cable clamps
    – Combined 70V/100V and low impedance direct operation
    – 20 Watts at 8Ω nominal setting
    – 15W multi-tap at 70V/100V
    – 68 Hz – 17 kHz bandwidth with wide 130° coverage
    – White or black (-BK)

    111,00130,20

    Available in 1-3 days

  • JBL CSMA-240 MIXER AMPLIFIER 8 INPUTS 2x40W/100V/4Ω 2 ZONES

    More operating efficiency and reliability by using fewer parts. – Significantly reduced power consumption. – Greater accuracy and best-in-class signal-to-noise performance. – A proprietary hybrid analog-digital integrated circuit. – Conform to lead-free RoHS standards. Are lighter in weight leading to less freight and reduced emissions. – Require less power and produce less heat. – Include a low-energy powder coat. – Fanless, space-saving 1U design. – Iluminated rings make them easy to see and operate. – Euro-block type mic/line input connectors and output connectors.
    Independent bass and treble controls for each output channel. – Supports 70V and 100V distributed audio systems without needing a separate transformer. – Remote volume control capability using JBL. – CSR-V module and standard Ehternet cable. Priority muting. – Phantom power. – Configurable output routing. – Universal power supply.
    832,99979,60

    Available in 1-3 days

  • JBL CSMA-1120 MIXER AMPLIFIER 4 INPUTS 120W/100V/4Ω 1 ZONE

    – More operating efficiency and reliability by using fewer parts.
    – Significantly reduced power consumption.
    – Greater accuracy and best-in-class signal-to-noise performance.
    – A proprietary hybrid analog-digital integrated circuit.
    – Are lighter in weight leading to less freight and reduced emissions.
    – Require less power and produce less heat.
    – Include a low-energy powder coat.
    – Fanless, space-saving 1U design.
    – Illuminated rings make them easy to see and operate.
    – Euro-block type mic/line input connectors and output connectors.
    – Independent bass and treble controls for each output channel.
    – Supports 70V and 100V distributed audio systems without needing a separate transformer.
    – Remote volume control capability using JBL.
    – Conforms to lead-free RoHS standards.
    – CSR-V module and standard Ehternet cable.
    – Priority muting.
    – Phantom power.
    – Configurable output routing.
    – Universal power supply.
    1.240,00

    Available in more than 30 days

  • JBL CSMA-180 MIXER AMPLIFIER 4 INPUTS 80W/100V/4Ω 1 ZONE

    – More operating efficiency and reliability by using fewer parts.
    – Significantly reduced power consumption.
    – Greater accuracy and best-in-class signal-to-noise performance.
    – A proprietary hybrid analog-digital integrated circuit.
    – Conform to lead-free RoHS standards.
    – Are lighter in weight leading to less freight and reduced emissions.
    – Require less power and produce less heat.
    – Include a low-energy powder coat.
    – Fanless, space-saving 1U design.
    – Illuminated rings make them easy to see and operate.
    – Euro-block type mic/line input connectors and output connectors.
    – Independent bass and treble controls for each output channel.
    – Supports 70V and 100V distributed audio systems without needing a separate transformer.
    – Remote volume control capability using JBL.
    – CSR-V module and standard Ehternet cable.
    – Priority muting.
    – Phantom power.
    – Configurable output routing.
    – Universal power supply.
    791,00930,00

    Available in more than 30 days

  • JBL CSMA-280 MIXER AMPLIFIER 8 INPUTS 2x80W/100V/4Ω 2 ZONES

    – More operating efficiency and reliability by using fewer parts.
    – Significantly reduced power consumption.
    – Greater accuracy and best-in-class signal-to-noise performance.
    – A proprietary hybrid analog-digital integrated circuit.
    – Conform to lead-free RoHS standards.
    – Are lighter in weight leading to less freight and reduced emissions.
    – Require less power and produce less heat.
    – Include a low-energy powder coat.
    – Fanless, space-saving 1U design.
    – Illuminated rings make them easy to see and operate.
    – Euro-block type mic/line input connectors and output connectors.
    – Independent bass and treble controls for each output channel.
    – Supports 70V and 100V distributed audio systems without needing a separate transformer.
    – Remote volume control capability using JBL.
    – CSR-V module and standard Ehternet cable.
    – Priority muting.
    – Phantom power.
    – Configurable output routing.
    – Universal power supply.
    1.351,60

    Available in more than 30 days

  • BC SPEAKERS 10-HPL64 16 OHM LF DRIVER 10′ 400W 98.5dB Neodymium RING

    400 W continuous program power capacity
    64 mm (2.5 in) aluminium voice coil
    60 – 4000 Hz response
    98.5 dB sensitivity
    Neodymium magnet allows a very light yet powerful motor assembly
    173,00192,20

    Available in 1-3 days

  • AKG CS3 DU50 DELEGATE UNIT WITH 50cm/20IN GOOSENECK

    The CS3 DU microphone station is the basic delegate unit for the CS5 conference systems. It provides both an integrated loudspeaker as well as two 3.5 mm stereo headphone outputs and could be used for up to 2 delegates. Depending on the selected operating mode, the PTT key enables the speaker to directly switch on their microphone or to enter the system waiting list.
    412,99434,00

    Available in more than 30 days

  • JBL JRX 218S SUB, 350W, 18”, 4Ω, 98dB

    – 18 in. compact subwoofer.
    – 350 W (continuous), 1400 W (peak) power capacity.
    – The rugged enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for durability and improved low-frequency performance. The enclosure is covered in black carpet.
    – A top mounted, cast aluminum 36 mm pole mount receptacle can receive an optional SS3BK pole to facilitate use of the JRX218S as a base for a midhigh speaker cabinet.
    – Non-resonant, all steel handles are used.
    – Attractive 18-gauge perforated steel grille protects components from damage.
    509,39620,00

    Available in 1-3 days

  • JBL JRX 215 2-WAYS SPEAKER, 250W, 15”, 8Ω, 98dB

    – JBL 15 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
    – JBL 2414H-C 25 mm (1 in ) polymer diaphragm compression driver improves high frequency performance as well as system reliability.
    – The advanced network topology crossover design shapes the frequency response to deliver coherent summation in the crossover region.
    – High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
    – Progressive Transition? high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
    – The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in ) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
    – SonicGuard? protects the high frequency driver from excess power without interrupting the performance.
    – Non-resonant, all-steel handles are used.
    – Attractive 18-gauge hexagon perforated, steel grille protects components from damage.
    – Dual-angle pole-mount socket allows the speakers to tilt 10° for more uniform audience coverage.
    384,31465,00

    Available in 1-3 days

  • JBL JRX 212 2-WAYS SPEAKER, 250W, 12”, 8Ω, 98dB

    – JBL 12 in low frequency driver with a 64 mm (2.5 in)
    diameter edgewound ribbon voice coil which provides
    more cross-sectional wire area in the voice coil gap than
    round wire designs, for greater efficiency and power handling.
    – JBL 2414H-C 25 mm (1 in) polymer diaphragm
    compression driver improves high frequency
    performance as well as system reliability.
    – The advanced network topology crossover design shapes
    frequency response and delivers “coherent summation”
    in the crossover region.
    – High-voltage capacitors and inductors with massive cores
    and heavy gauge wire enable the crossover network to
    handle high power without saturating.
    – Progressive Transition high frequency waveguide provides
    superior coverage control, reduced distortion, and smoother
    frequency response.
    – The rugged, acoustically superior enclosure is constructed
    from 19 mm (.75 in) MDF (Medium Density Fiberboard) using
    advanced adhesives and mechanical fastener technology for
    extreme durability and improved low-frequency performance.
    – SonicGuard protects the high frequency driver from excess
    power without interrupting the performance.
    – Non-resonant, all-steel handles are used.
    – Attractive 18-gauge hexagon perforated, steel grille protects
    components from damage.
    – Dual-angle pole-mount socket allows the speaker to tilt
    10°for more uniform audience coverage.
    270,95328,60

    Available in 1-3 days

  • TAIDEN CBL6PS-20 6-POLE EXTENSION CABLE 20m

    20 m 6-pin Extension Cable (with a plug and a socket)
    105,40

    Available in 1-3 days

  • TOA N-8650DS IP INDOOR STATION

    The N-8650DS is an indoor use IP door station employing packet audio technology. Connecting the N-8650DS to an IP network (LAN or WAN) permits hands-free conversation of high sound quality to be made between the N-8650DS and the intercom station connected to the IP Intercom Exchange, or between the N-8650DS and an IP multifunctional master station. Besides, the N-8650DS can be used in conjunction with the Multi Interface units through a network. The N-8650DS is equipped with 1 channel of control input, 5 channels of control outputs (including 1 channel of relay control output), and speaker output, thereby enabling connections of external equipment such as a sensor, indicator, and external speaker.
    1.190,40

    Available in more than 30 days

Κύριο Μενού Πλοήγησης