Professional Sound
Popular Products
-
€106,64
€131,44AUSTRIAN AUDIO HI-X15 CLOSED-BACK DESIGN HEADPHONES
€106,64€131,44Available in 1-3 days
-
AKG K 92 STEREO HEADPHONES CLOSED-BACK & OVER-EAR DESIGN
Stereo headphones – closed-back and over-ear design, 32 Ohms impedance, sensitivity 113 dB SPL/ V, frequency range: 16 – 22000 Hz, 200mW maximum input power, 3 m cable with 3,5 mm plug and 6,3 mm adapter, weight: 200g€57,04€70,68Available in 1-3 days
-
JBL CONTROL 50 PACK SUBWOOFER-SATELLITE SYSTEM WITH 4 SAT/SPEAKERS BL
Set with 4 satelite CONTROL 52 and 1 Sub CONTROL 50S/T
WALL-MOUNT BRACKETS INCLUDEDCONTROL 52
The stylish Control 52 satellite loudspeaker produces superb high fidelity sound via a lowdistortion 60 mm (2.5 in) driver, which features a secondary bucking magnet for high efficiency, rubber half roll surround for enhanced bass performance, 19 mm (0.75 in) copper clad aluminum wire voice coil on a vented Nomex, former for high fidelity and reliability, and a copper-capped pole piece for more consistent impedance and extended high frequency response. The wall bracket allows each speaker to be angled up to 45° off-axis.CONTROL 50S/T
The 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance.€801,99€967,20Available in more than 30 days
-
OMNITRONIC LH-055 PASSIVE DIRECT BOX
OMNITRONIC LH-055 Passive DI box€51,79€60,76OMNITRONIC LH-055 PASSIVE DIRECT BOX
€51,79€60,76Available in 1-3 days
-
BSS AR-133 ACTIVE DIRECT INJECTION (DI) box (1 – 5 pcs.)
Active di-box with phantom & bettery€139,00€161,20BSS AR-133 ACTIVE DIRECT INJECTION (DI) box (1 – 5 pcs.)
€139,00€161,20In stock
-
NEXT AUDIOCOM W8 White Wall Speaker (pair)
8″ A/W SPEAKER, WHITE (PAIR) [100V|8Ω]
€328,00€344,80NEXT AUDIOCOM W8 White Wall Speaker (pair)
€328,00€344,80In stock
-
BC SPEAKERS 08-CXN51 COAXIAL SPEAKER Neodymium 8” LF:500W, HF:100W
500 W continuous program power capacity
100° nominal coverage
70 – 18000 Hz response
97dB sensitivity
Single Neodymium magnet assembly€366,00€406,72Available in more than 30 days
-
DBX DBX DRIVE RACK PA2 2×6 PA MANAGEMENT SYSTEM
The DriveRack PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’s proprietary AutoEQ and AFS algorithms, a new input delay module for delaying the FOH system to the backline, Ethernet control via an Android, iOS, Mac, or Windows device, and updated Wizards, the DriveRack PA2 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.All New Setup Wizard
Streamlined AutoEQ
All New AFS (Advanced Feedback Suppression)
Mobile Control (Android, iOS, Mac, Windows)
dbx Compression
Graphic EQ
8-Band Parametric EQ (adjusted when using the AutoEQ) Input
Subharmonic Synthesis
Crossover (supports full range, 2-way, and 3-way systems)
8-Band Parametric EQs (used for speaker tunings) Output
dbx Limiting
Driver Alignment Delays€509,08€595,20DBX DBX DRIVE RACK PA2 2×6 PA MANAGEMENT SYSTEM
€509,08€595,20Available in 1-3 days
-
JBL VTX S25 SUB, 2x2000W, 2×15”, 8Ω, 102dB
The dual 15″, cardioid-arrayable S25 subwoofer provides industry-leading very low frequency output and can be integrated with V20 with tremendous versatility, either ground-stacked or suspended in mixed arrays or standalone.Differential Drive Technology
V5 System Integration€9.424,00Available in more than 30 days
-
JBL VTX V20 3-WAYS SPEAKER, 2×10”+4×5”+2×1.5”, 8Ω, 130dB
VTX V20 features the advanced technology and extraordinary performance of the groundbreaking VTX V25 in a smaller format, high power density 3-way system complemented by a new suspension system that provides efficient transport, fast setup and precise configuration. All VTX V20 components have been specifically engineered to provide stable 110 degree horizontal coverage and effective line source array coupling in the vertical plane while delivering linear, transparent sound up to surprisingly high output levels for its diminutive size.Differential Drive Technology
4th generation advanced high frequency waveguide
Small Format Version of Patented D2 Dual Compression Driver
ASM Suspension System
V5 System Integration€13.020,00Available in more than 30 days
-
JBL CSS-H30 HORN SPEAKER 1.5” 8Ω/100V 30W/30W 108dB IP-65
The Commercial Solutions Series CSS-H30 Paging Horn provides excellent voice range clarity for public address systems, announcement/paging, intercom, security, alarm and industrial applications. Designed for demanding environmental conditions, the CSS-H30 is highly weather resistant (IP-65 rated) so it can be used in either indoor or outdoor applications. The focused coverage pattern allows the horn to project the sound a farther distance than is the case with wider-coverage paging horns. Typical applications for this product are public access areas, warehouses, factories, schools, recreational facilities, commercial buildings, distribution centers, civic centers, and other commercial sound and protectivesignaling systems.Excellent voice range clarity for announcement and paging.
High sensitivity delivers high sound levels with minimal power amplification.
Focused 50° horizontal by 70° vertical coverage for long throw capability.
Phenolic diaphragm driver for outdoor durability and high reliability.
UL-registered 30-watt multi-tap transformer, with 8 ohm direct bypass.
Built-in high-pass filter enhances reliability by protecting against low frequency damage.
Highly weather-resistant, with stainless steel bracket and hardware.€178,00€208,32JBL CSS-H30 HORN SPEAKER 1.5” 8Ω/100V 30W/30W 108dB IP-65
€178,00€208,32Available in more than 30 days
-
JBL CSS-H15 HORN SPEAKER 1.3” 8Ω/100V 15W/15W 105dB IP-65
The Commercial Solutions Series CSS-H15 Paging Horn provides excellent voice range clarity for public address systems, announcement/paging, intercom, security, alarm and industrial applications. Designed for demanding environmental conditions, the CSS-H15 is highly weather resistant (IP-65 rated) so it can be used in either indoor or outdoor applications. The wide coverage pattern allows the horn to cover a larger audience area than is the case with many paging horns.Excellent voice range clarity for announcement and paging.
High sensitivity delivers high sound levels with minimal power amplification.
Wide 70° horizontal by 90° vertical coverage for medium throw applications.
Phenolic diaphragm driver for outdoor durability and high reliability.
UL-registered 15-watt multi-tap transformer, with 8 ohm direct bypass.
Built-in high-pass filter enhances reliability by protecting against low frequency damage.
Highly weather-resistant, with stainless steel bracket and hardware.€132,00€155,00JBL CSS-H15 HORN SPEAKER 1.3” 8Ω/100V 15W/15W 105dB IP-65
€132,00€155,00Available in more than 30 days
-
BESPECO WS06BK WINDSCREEN
Microphone windscreen in black colour.€2,01€2,23BESPECO WS06BK WINDSCREEN
€2,01€2,23Available in more than 30 days
-
CROWN DCI8/600N POWER AMPLIFIER 8X600W NETWORK
Amplifier installation 8x600W loads 4/8/70V/100V with independent load operation per channel technology DriveCore, pulse power and topology classD. Operation at loads 2h, Fan variable speed, 0,35% THD, balanced 3pin block connectors, auto standby mode 30 ‘. Feed world use 100-240v50/60hz. Aux port for control and interface with control systems. Rackmount 2U. Dimensions: 8.75cm x47.5cm x 42,5 cm. ISSUE N (NETWORK, MONITORING & CONTROL). They Analog and Digital inputs, programmable GPIO Ports, DSP with LevelMAX Limiters, Input / Output EQ, Delay, Matrix Mixer, Speaker Line Monitoring, Hi Qnet and BLU-Link ports. Weight 13kg.€11.160,00Available in more than 30 days
-
CROWN DCI8/300N POWER AMPLIFIER 8X300W NETWORK
Amplifier installation 8x300W loads 4/8/70V/100V with independent load operation per channel technology DriveCore, pulse power and topology classD. Operation at loads 2h, Fan variable speed, 0,35% THD, balanced 3pin block connectors, auto standby mode 30 ‘. Feed world use 100-240v50/60hz.Aux port for control and interface with control systems. Rackmount 2U. Dimensions: 8.75cm x47.5cm x 35.63cm. ISSUE N (NETWORK, MONITORING & CONTROL). They Analog and Digital inputs, programmable GPIO Ports, DSP with LevelMAX Limiters, Input / Output EQ, Delay, Matrix Mixer, Speaker Line Monitoring, Hi Qnet and BLU-Link ports. Weight 13kg.€6.380,00€7.502,00CROWN DCI8/300N POWER AMPLIFIER 8X300W NETWORK
€6.380,00€7.502,00Available in more than 30 days
-
CROWN DCI2/300N POWER AMPLIFIER 2x300W NETWORK
DCi2/300N Amplifier installation 2x300W loads 4/8/70V/100V with independent load operation per channel technology DriveCore, pulse power, and topology classD. Operation at loads 2h, Fan variable speed, 0,35% THD, balanced 3pin block connectors, auto standby mode 30 ‘. Feed global use 100-240v50/60hz. Aux port for control and interface with control systems. Rackmount 2U. Dimensions: 8.75cm x47.5cm x 35.63cm. ISSUE N (NETWORK, MONITORING & CONTROL). They Analog and Digital inputs, programmable GPIO Ports, DSP with LevelMAX Limiters, Input / Output EQ, Delay, Matrix Mixer, Speaker Line Monitoring, Hi Qnet and BLU-Link ports. Weight 13kg.€2.852,00Available in 1-3 days
-
CROWN DCI4/1250 POWER AMPLIFIER 4x1250W
Amplifier installation 4x1250W loads 4/8/70V/100V with independent load operation per channel technology DriveCore, pulse power and topology classD. Operation at loads 2h, Fan variable speed, 0,35% THD, balanced 3pin block connectors, auto standby mode 30 ‘. Feed world use 100-240v50/60hz. Aux port for control and interface with control systems. Rackmount 2U. Dimensions: 8.75×47.5×42.5cm. Weight 13kg.€5.378,00€6.324,00CROWN DCI4/1250 POWER AMPLIFIER 4x1250W
€5.378,00€6.324,00Available in more than 30 days
-
CROWN DCI2/1250 POWER AMPLIFIER 2x1250W
Amplifier installation 2x1250W loads 4/8/70V/100V with independent load operation per channel technology DriveCore, pulse power and topology classD. Operation at loads 2h, Fan variable speed, 0,35% THD, balanced 3pin block connectors, auto standby mode 30 ‘. Feed world use 100-240v50/60hz. Aux port for control and interface with control systems. Rackmount 2U. Dimensions: 8.75×47.5×42.5cm. Weight 13kg.€3.480,00€4.092,00CROWN DCI2/1250 POWER AMPLIFIER 2x1250W
€3.480,00€4.092,00Available in more than 30 days
-
JBL VTX F18S SUB, 2000W, 18”, 8Ω, 95dB
18″ Compact Single Subwoofer
The VTX F series is a line of multi-purpose loudspeakers designed to give sound production companies a variety of flexible options for deploying high-quality audio, either as a stand-alone FOH system, a satellite and subwoofer system (with companion VTX F18S), or on-stage floor monitor and fill speaker.2269H Differential Drive 18″
Exceptionally High Power Handling (2000 W Continuous, 8000 W Peak AES 2 hr)
Massive Linear Excursion Capability (3.5″ peak-to-peak)
Reverse-Cardioid Arrayable (front NL4)
Reinforced M20 Extension Rod Receptacle
16x M10 Mount Points (4 per side, 4 top/bottom)
Convenient Handle Locations (4x)
Attachment plates included as standard for stacked F18S plus F12 or F15 configurations€3.348,00JBL VTX F18S SUB, 2000W, 18”, 8Ω, 95dB
€3.348,00Available in more than 30 days
-
JBL VTX F15 2 WAYS SPEAKER 1000W, 15”, 8Ω,98dB
15″ Bi-Amplified 2-Way System
The VTX F series is a line of multi-purpose loudspeakers designed to give sound production companies a variety of flexible options for deploying high-quality audio, either as a stand-alone FOH system, a satellite and subwoofer system (with companion VTX F18S), or on-stage floor monitor and fill speaker.D2430K D2 Dual Diaphragm Dual Driver
Progressive Transition Waveguide (90° x 50°)
Bi-Amplified 2-Way System
BSS Audio OmniDriveHD V5 Processing
For use with Crown ITechHD and Crown VRack
JBL HiQnet Performance Manager Control€2.480,00Available in more than 30 days
-
JBL VTX F12 2 WAYS SPEAKER 1000W, 12”, 8Ω,96dB
12″ Bi-Amplified 2-Way System
The VTX F series is a line of multi-purpose loudspeakers designed to give sound production companies a variety of flexible options for deploying high-quality audio, either as a stand-alone FOH system, a satellite and subwoofer system (with companion VTX F18S), or on-stage floor monitor and fill speaker.D2430K D2 Dual Diaphragm Dual Driver
Progressive Transition Waveguide (90° x 50°)
Bi-Amplified 2-Way System
BSS Audio OmniDriveHD V5 Processing
For use with Crown ITechHD and Crown VRack
JBL HiQnet Performance Manager Control€2.046,00Available in more than 30 days
-
SOUNDCRAFT ViSB-DANTE VI STAGEBOX IO CARD
ViSB-DANTE is a 1 slot width 64 channel stagebox card, allowing 64 inputs and 64 outputs onto an Audinate Dante network. Each card ships with a free Dante Virtual Soundcard license.
Note – this is an IO card, not an HD card. There is not control here so this doesn’t replace the MADI card.€2.108,00Available in more than 30 days
Reach for Hi-X15 headphones when you need reliable sound and know things might get a little rough. Their sophisticated folding design, rare in this price range, means they’re easy to store and carry, and their durable all-metal hinge and bow mean they’re extremely robust. The closed construction and good insulation of the Hi-X15 headphones open up many areas of application. They show their strengths convincingly during studio recording sessions, as a monitor on stage, and as a reliable companion in the rehearsal room. And the Hi-X15 won’t leave your side when you’re enjoying music at home, writing the next hit in your project studio, mastering your new keyboard, or going on tour.
Designed and engineered in Austria.