uncategorized

  • NEUTRIK NXX1RX-T XIRIUM X TOURING TRANSMETER XTX

    Features & Benefits
    – Time Division Multiplexing
    Four audio signals on one radio frequency only
    – Direct communication
    The system consists of two types of devices (transmitter and receiver) that can be flexibly expanded.
    – Unlimited number of XRX (Broadcast Mode)
    In one system up to four XTX and an unlimited number of XRX can be combined.
    – Going beyond boundaries ? increase reception reliability ? expand radio field
    An XRX can also be used as a repeater and thus bridge barriers, send a redundant signal (diversity) or increase the range.
    – Pure Sound ? Data transmission in studio quality
    XIRIUM X transmits uncompressed data with a sampling rate of 48 kHz and with a resolution of 24 bit within the 5 GHz band. THD (total harmonic distortion) < 0.01% @ 1 kHz, SNR (signal-to-noise ratio) (dynamic) > 105 dB @ 1 kHz, latency 3 msec. This means that audio signals are transferred with a delay of 3 msec and uncompressed in studio quality.
    – Robust ? Secure and noiseless operation
    Transmission and receiving protocol specifically developed for DIWA, FEC (forward error correction) and concealment algorithms correct any irregularities, antennas ? diversity.
    – Plug and Play ? Easy installation and operation
    Operation within the 5 GHz band, no licenses required, automatic frequency management, memory functions.
    0,00

    Available in more than 30 days

  • JBL CONTROL 16CT-BK CEILING SPEAKER 2-WAYS, 100V/8Ω, 6.5”,100W,91dB

    Control 16CT is a full-range ceiling speaker consisting of a 165 mm (6.5 inch) high tech cone driver and a 19mm soft-dome liquid cooled tweeter mounted in a vented, paintable baffle made of UV resistant UL94-V0 and UL94-5HB material, with a pre-attached blindmount backcan for quick and easy installation.

    – Components:
    – 165 mm (6.5 in) high output driver with polypropylene cone
    and butyl rubber surround
    – 19 mm (0.75 in) soft-dome liquid-cooled tweeter
    – Blind-mount backcan for quick and easy install
    – Dual conduit/cable clamps
    – Combined 70V/100V and low impedance direct operation
    – 50 Watts at 8Ω nominal setting
    – 30W multi-tap at 70V/100V
    – 62 Hz – 20 kHz bandwidth with wide 110° coverage
    – High 91 dB sensitivity for high maximum SPL
    – White or black (-BK)

    201,00235,60

    Available in 1-3 days

  • JBL CONTROL 14CT-BK CEILING SPEAKER 2-WAYS, 100V/8Ω, 4”,60W,87dB

    Control 14CT is a full-range ceiling speaker consisting of a 100 mm (4 inch) high tech cone driver and a 19 mm soft-dome liquid cooled tweeter mounted in a vented, paintable baffle made of UV resistant UL94-V0 and UL94-5HB material, with a pre-attached blind-mount backcan for quick and easy installation.

    Components:
    – 100 mm (4.0 in) high output driver with polypropylene cone
    and butyl rubber surround
    – 19 mm (0.75 in) soft-dome liquid-cooled tweeter
    – Blind-mount backcan for quick and easy install
    – Dual conduit/cable clamps
    Combined 70V/100V and low impedance direct operation
    – 30 Watts at 8Ω nominal setting
    – 25W multi-tap at 70V/100V
    – 74 Hz ? 20 kHz bandwidth with wide 120° coverage
    – White or black (-BK)

    153,00179,80

    Available in more than 30 days

  • JBL CONTROL 12CT-BK CEILING FULLRANGE SPEAKER, 100V/8Ω, 3”,40W,84dB

    Control 12CT is a full-range ceiling speaker consisting of 76 mm (3 inch) wide-bandwidth cone driver mounted in a vented, paintable baffle made of UV resistant UL94-V0 material, with a preattached blind-mount backcan for quick and easy installation.

    – 76 mm (3 in) full-range driver
    – Blind-mount backcan for quick and easy install
    – Dual conduit/cable clamps
    – Combined 70V/100V and low impedance direct operation
    – 20 Watts at 8Ω nominal setting
    – 15W multi-tap at 70V/100V
    – 68 Hz – 17 kHz bandwidth with wide 130° coverage
    – White or black (-BK)

    111,00130,20

    Available in more than 30 days

  • SOUNDCRAFT SIO-AES8 AES/EBU 8+8 D TYPE CARD WITH WORD CLOCK

    Expansion card with 8 x AES / EBU I / OD sub
    1.016,80

    Available in more than 30 days

  • ULTIMATE JS-SP50 ADJUSTABLE SUBWOOFER POLE

    The JS-SP50 is exactly what you need for your subwoofer/satellite speaker PA system. It’s adjustable in height from 31.5″ to 52.5″ and mounts between a subwoofer cabinet with a top mounting hole and a speaker with a bottom mounting hole (1.375″ for both). The JS-SP50 features both a friction locking knob and a security pin system and is made from durable steel.

    JS-SP50 Adjustable Subwoofer Pole Features:
    Heavy-duty construction
    Height adjustable from 31.5″ to 52.5″
    Friction locking knob with security pin
    1 3/8″ upper and lower tubes

    0,00

    Available in more than 30 days

  • ULTIMATE JS-LPT200 LAPTOP STAND

    While the JS-LPT200 is the perfect laptop stand for musicians and DJs on the go, in the studio, or even in the office, it’s also a great option when you need a portable, sturdy stand for elevating a lighting controller, small mixer, CD player, multi-track recorder, DJ equipment, and more.

    With five adjustable height positions, the JS-LPT200 puts your laptop or small, digital and analog sound equipment at just the right height. It also features three fixed width positions to hold a variety of music gear, and offers an angled platform with rubber friction pads and front bumpers to ensure your laptop’s safety.

    The Accessory Platform is the perfect place to hold hard drives, USB hubs, MP3 players, CDs, and other laptop and music accessories. It’s vented, so your accessories won’t overheat, and is also height and width adjustable.

    JS-LPT200 Double-tier, Multi-purpose Laptop/DJ Stand with Stand Alone Base Features:
    Multi-purpose stand: laptops, lighting controller, small mixer, CD player, DJ equipment, etc.
    Vented accessory platform included to hold hard drives, USB hubs, audio interfaces, and more
    Five height positions
    Three width positions
    Weight Capacity: 20 lbs.

    0,00

    Available in more than 30 days

  • ULTIMATE JS-LPT100 LAPTOP STAND

    While the JS-LPT100 is the perfect laptop stand for musicians and DJs on the go, in the studio, or even in the office, it’s also a great option when you need a portable, sturdy stand for elevating a lighting controller, small mixer, CD player, multi-track recorder, DJ equipment, and more.

    With five adjustable height positions, the JS-LPT100 puts your laptop or small, digital and analog sound equipment at just the right height. It also features three fixed width positions to hold a variety of music gear, and offers an angled platform with rubber friction pads and front bumpers to ensure your laptop’s safety.

    You can use the JS-LPT100 free standing on a desk, clamped horizontally to the edge of a table or rack case, or even clamped vertically to the case of your DJ equipment. It ships with one set of 12″ support legs for use on flat surfaces and a set of clamps for mounting horizontally or vertically.

    JS-LPT100 Single-tier, Multi-purpose Laptop/DJ Stand with Stand Alone Base & Multi-use Surface Clamps Features:
    Multi-purpose stand: laptops, lighting controller, small mixer, CD player, DJ equipment, etc.
    Multi-use surface clamps included for horizontal or vertical positioning
    Five height positions
    Three width positions
    Weight Capacity: 20 lbs.

    0,00

    Available in more than 30 days

  • ULTIMATE JS-MNT101 UNIVERSAL IPADHOLDER

    This highly affordable iPad holder puts your music, lyrics, set lists, tabs, contacts, and all other important documents and information right where you need them – at the tip of your fingers while you’re playing music! The JS-MNT101 mounts to the pole of nearly any microphone stand and securely holds all iPads including the iPad mini. You can adjust the angle and axis of your iPad easily at two different points on the JS-MNT101. What’s more, it’s easy to clamp your iPad in either landscape or portrait view using an additional adjustment knob on the back of the holder itself.

    JS-MNT101 Features:
    Securely holds all iPads including iPad mini
    Connects to microphone stand pole
    Highly adjustable to suit viewing needs
    Secures in portrait or landscape view

    0,00

    Available in more than 30 days

  • ULTIMATE JS-MC100 MICROPHONE STAND TRIPOD BASE

    On stage or in the studio, you need a mic stand you can rely on. The Tripod Mic Stand resists tipping and is built tough to withstand every-day use. The powder-coated finish is scratch resistant to maintain its appearance, even on the most rigorous tour or recording schedules. Easily adjust the Tripod Mic Stand to perfect height with the traditional turn clutch.

    JS-MC100 Tripod Microphone Stand Features:
    Height adjustable to fit various needs
    Strong, tip-resistant tripod base
    Scratch-resistant, poweder-coated black finish
    Die-cast leg housing for dependable base support

    23,1927,28

    Available in 1-3 days

  • ULTIMATE ULTI-BOOM-FB BOOM FOR MIC STAND

    When it came time to design a new generation of microphone boom arms, Ultimate Support decided to throw known conventions out the window and give way to innovation. Welcome to the Ulti-Boom professional microphone boom arms. Available in telescoping or fixed-length models, Ulti-Boom mic boom arms feature heavy-duty, die-cast counterweights, ergonomic adjustment knobs that feel great in your hands, and lightweight (yet durable) anodized aluminum tubing with internal glides that ensure fast, smooth, noise-free adjustment. Ulti-Boom by Ultimate Support has redefined how professional boom arms should perform.

    Ulti-Boom – Fixed Length Product Breakdown:
    Ergonomic Adjustment Knobs
    Heavy-duty Counterweight
    Aluminum Tubing with Architectural Anodized Finish
    80% Field Serviceable Parts

    0,00

    Available in more than 30 days

  • BESPECO IRO-MB2000 BLACK IRON MIC CABLE 20m BLK(XLR-XLR) MICROPHONE CABLE

    Assembled microphone cable realized with metal cannon and shielded 6,3 mm. cable. Available in the colors black, red and blue. Length mt. 20.
    40,5145,01

    Available in more than 30 days

  • BESPECO IRO-MB1000 BLACK IRON MIC CABLE 10m BLK(XLR-XLR) MICROPHONE CABLE

    Assembled microphone cable realized with metal cannon and shielded 6,3 mm. cable. Available in the colors black, red and blue. Length mt. 10.
    25,0027,78

    Available in 1-3 days

  • JBL PD 6322/95 3-WAYS SPEAKER 1500W 2×12” 1×8” 1×1,5” 8Ω 114dB

    Speaker full range of high quality and sound pressure 3-way. 2×12 ” woofer + 8 ” midrange +1,5 ” HF compressor driver with 3”voice coil. Power 1500W rms, 8 ohm, conical dispersion of 90 ° x50 °, response 49hz-15kHz (± 3dB), sensitivity 114dB watt / meter. Rotating waveguides mid and high frequencies, birch wood cabinet lined with DuraFlex special paint for increased durability and 20 points swing type M10. Mode full range, bi-amp, tri-amp, Neutrik NL4 connectors and covered barrier strip terminals. IP-X3 specifications and mil-std 810. Colour black with white option on special order, dimensions 991 x 673 x 706 mm (HxWxD). Weight 77 kgr. Suitable for use in theaters, venues, clubs and sports facilities.
    6.324,00

    Available in more than 30 days

  • JBL PD 6322/66 3-WAYS SPEAKER,1500W 2×12” 1×8” 1×1,5” 8Ω 116dB

    Speaker full range of high quality and sound pressure 3-way. 2×12 ” woofer + 8 ” midrange +1,5 ” HF compressor driver with 3” voice coil. Power 1500W rms, 8 ohm, conical dispersion 60°x60°, response 49hz-16kHz (± 3dB), sensitivity 116dB watt / meter. Rotating waveguides mid and high frequencies, birch wood cabinet lined with DuraFlex special paint for increased durability and 20 points swing type M10. Mode full range, bi-amp, tri-amp, Neutrik NL4 connectors and covered barrier strip terminals. IP-X3 specifications and mil-std 810. Colour black with white option on special order, dimensions 991 x 673 x 706 mm (HxWxD). Weight 71.4 kgr. Suitable for use in theaters, venues, clubs and sports facilities.
    6.324,00

    Available in more than 30 days

  • JBL PD 6322/43 3-WAYS SPEAKER 1500W 2×12” 1×8” 1×1,5” 8Ω 112dB

    Speaker full range of high quality and sound pressure 3-way. 2×12 ” woofer + 8 ” midrange +1,5 ” HF compressor driver with 3”voice coil. Power 1500W rms, 8 ohm, conical dispersion of 40 ° x30 °, response 49hz-16kHz (± 3dB), sensitivity 112dB watt / meter. Rotating waveguides mid and high frequencies, birch wood cabinet lined with DuraFlex special paint for increased durability and 20 points swing type M10. Mode full range, bi-amp, tri-amp, Neutrik NL4 connectors and covered barrier strip terminals. IP-X3 specifications and mil-std 810. Colour black with white option on special order, dimensions 991 x 673 x 897 mm (HxWxD). Weight 87.3 kgr. Suitable for use in theaters, venues, clubs and sports facilities.
    8.432,00

    Available in more than 30 days

Κύριο Μενού Πλοήγησης