Professional Sound

  • CROWN CDI-6000 POWER AMPLIFIER 2x2100W/4Ω 2x2500W 70V

    CDi 6000 amplifier, the fourth amplifier in the CDi Series, has the ability to run both low-impedance two-, four- and eight-ohm loads as well as 70- and 140-volt outputs. The amp also features 20 available presets that can be recalled at the touch of a button.
    3.901,994.588,00

    Available in more than 30 days

  • JBL 8138 CEILING SPEAKER 100V 8” 6W 97dB

    The 8138 is an 8″ ceiling speaker designed for use with a pre-install inceiling backcan, resulting in highfidelity performance at a costeffective price point. The 8138 is ideal for a wide variety of commercial sound applications from restaurant and retail to professional offices and reception areas.
    70,9383,08

    Available in 1-3 days

  • JBL CONTROL CRV 2-WAYS SPEAKER 150W/4Ω 30W/100V 2×4” 89dB IP-34

    The unique, contemporary curved design provides a stylish look with plenty of versatility. A 70V/100V transformer
    and outdoor capability make Control CRV ideal for a wide variety of commercial applications. The Control CRV
    offers numerous mounting options and a wide range of configurations, providing an endless variety of solutions
    in terms of coverage, appearance and mounting.
    329,00396,80

    Available in more than 30 days

  • JBL CONTROL 52 HIGH FREQ.SPEAKER 25W, 2.5”, 16Ω, 82DB

    The stylish Control 52 satellite loudspeaker produces superb high fidelity sound via a lowdistortion 60 mm (2.5 in) driver, which features a secondary bucking magnet for high efficiency, rubber half roll surround for enhanced bass performance, 19 mm (0.75 in) copper clad aluminum wire voice coil on a vented Nomex, former for high fidelity and reliability, and a copper-capped pole piece for more consistent impedance and extended high frequency response. The wall bracket allows each speaker to be angled up to 45° off-axis.
    92,93109,12

    Available in more than 30 days

  • JBL CONTROL 50S/T SUBWOOFER, 150W/80W, 8”, 8Ω/100V, 89dB

    The 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance.
    518,00607,60

    Available in more than 30 days

  • JBL CBT 70JE COLUMN SPEAKER SUB 500W 4×5” 8Ω 96dB

    70 cm extension line array cabinet for CBT 70J with 4 x 5″ woofers
    1.264,80

    Available in more than 30 days

  • JBL CBT 70J COLUMN 2 WAYS SPEAKER 500W 4×5” 8Ω 98dB

    Frequency Response (-10 dB): 60 Hz – 20 kHz
    Sensitivity (SPL @ 1m, 3.3 ft): 100 dB
    Power Handling (low – Z): 500 W
    Max SPL: 127 dB (133 dB peak)
    Pattern Control Frequency (± 20°): 800 Hz
    Mounting: 10 x M6 insert points, wall bracket included
    Dimensions (H x W x D): 695 x 168 x 235 mm
    (27.4 x 6.6 x 9.3 in)
    Vertical Coverage: Narrow = 25° asymmetrical
    Broad = 45° asymmetrical
    Equalization: Music (flat)/Speech
    Tap Settings: 8 ohms
    1.899,002.232,00

    Available in more than 30 days

  • JBL CBT 100LA COLUMN FULLRANGE SPEAKER 325W 16×2” 8Ω 96dB

    Configuration: Passive
    Weight: 15.8 lbs.
    Size (H x W x D): 39.4 x 3.8 x 6 inches
    Drivers: 16 x 2-inch (Full-Range)
    Freq. range: 80-20,000 Hz
    Dispersion:
    – Vertical Narrow Mode – 15 degrees (2 kHz – 16 kHz) (±10 degrees)
    – Vertical Broad Mode – 40 degrees (1 kHz – 16 kHz) (±10 degrees)
    – Horizontal – 150 degrees (ave, 1 kHz – 4 kHz, ±20 degrees)
    Power:
    – 325 W (1300 W peak), 2 hrs
    – (8 ohm setting) 2: 200 W (800 W peak), 100 hrs
    Alternate: CBT 50LA (8 x 2-inch drivers)
    1.581,00

    Available in 1-3 days

  • JBL CBT 50LA COLUMN FULLRANGE SPEAKER 150W 8×2” 8Ω 93dB

    Components : Eight 50 mm (2 in) Full-Range
    Frequency Range (-10 dB) : 80 Hz – 20 kHz
    Coverage Pattern : Vertical 20° (1.5 kHz – 16 kHz, ±10°) / Horizontal 150° (ave, 1 kHz – 4 kHz, ±20°)
    Sensitivity (2.83V@ 1m) : 93 dB (speech mode, 2 kHz – 14 kHz) / 89 dB (music mode, 300 Hz – 18 kHz)
    Nominal Impedance : 8 ohms
    Power Capacity (8 ohm setting) : 150W (600W peak), 2 hrs / 100 W (400W peak), 100 hrs
    Max SPL : Speech mode: 115 dB cont ave (121 peak) / Music mode: 111 dB cont ave (117 peak)
    70V/100V Transformer Taps : 60W, 30W, 15W, (7.5W at 70V only), and 8Ω thru, via switch
    Enclosure : Fiberglass reinforced ABS cabinet, painted aluminum grille
    Outdoor Capability : IP-54 rated, per IEC529. UV, moisture and salt-spray resistant
    Color : Black
    Insert Points : Ten M6 insert points on back panel.
    Mounting : Included wall bracket provides continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points within the range. Ten threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for third-party bracket, or can be utilized for suspension.
    Dimensions (H x W x D) : 528 x 99 x 153 mm (20.8 x 3.9 x 6.0 in)
    Net Weight : 4.1 kg (9.0 lb)
    Included Accessories : Wall bracket
    620,00762,60

    Available in 1-3 days

  • AKG CS 5 MK 2,5 SYSTEM CABLE

    Cable connector 2,5m
    39,0055,80

    Available in 1-3 days

  • AKG CS 5 MK 1,25 SYSTEM CABLE

    Cable connector 1,25m
    32,0045,88

    Available in 1-3 days

  • AKG CS 5 VU CHAIRMAN/DELEGATE UNIT

    The CS5 VU can be configured either as a delegate station with a voting function for 2 participants, or as a chairperson station with voting and priority functions. In this function it can start votings directly from the station!
    Like the CS5 DU, it provides a microphone connection, PTT button, two built-in loudspeakers, and two individually adjustable headphone jacks.
    The loudspeakers reproduce the main mix (“floor signal”) while the headphone jacks allow the user to listen to the floor signal or one of 63 interpreted languages.
    In addition, the CS 5 VU incorporates a chip card reader for user identification by conference control software.
    A liquid crystal display and five soft buttons allow the user to call the meeting to order, initiate ballots, cast their vote, select languages for the headphone outputs, etc.
    608,00868,00

    Available in 1-3 days

  • TOA D-2008SP DIGITAL MIXING PROCESSOR UNIT

    The D-2008SP Digital Mixing Processor Unit is designed to have up to 32 audio inputs and outputs in total, and to be mounted in an EIA standard equipment rack (3U size). A built-in powerful signal processing function permits the unit to be used as both a mixer and a signal processor. Its audio input/output and control ports can accept optional plug-in modules, making the unit have a maximum of 32 inputs or 32 outputs and up to 2 control modules. Using the following optional modules enables the unit to perform their functions: Two D-983s for providing a maximum of 48 contact inputs and 32 contact outputs, D-984VC for VCA control, and D-2000CB for audio data transfer between multiple D-2008SP units. Each function is set by the dedicated setting software on a PC. Setting contents can be stored in the unit’s internal memory as preset memory, which can be recalled by the D-2008SP without using a PC. The D-2012C, when connected, remotely controls the D-2008SP’s basic operations such as volume control.
    6.200,00

    Available in more than 30 days

  • TOA BS-678BT WALL MOUNT SPEAKER 6W/100V-3W/70V 6” 94dB

    The BS-678BT, of which cabinet is made of wood, can be installed in a vertical or horizontal orientation. Either concealed in-wall wiring or exposed wiring can be used for speaker cable connection. The speaker structure that permits direct wall-mounting with screws prevents the speaker from falling easily even if an outward force is applied to. The input impedance can be easily changed by changing the tap position of the transformer. Two built-in 6-inch double cone speaker units deliver high quality sound. The push-in type input connector makes cable connections easy and allows bridge wiring. BS-678BT have a built-in attenuator and can be connected to a 2-wire or 3-wire system.
    48,3753,32

    Available in more than 30 days

  • TOA BS-678T WALL MOUNT SPEAKER 6W/100V-3W/70V 6” 94dB

    The BS-678T, of which cabinet is made of wood, can be installed in a vertical or horizontal orientation. Either concealed in-wall wiring or exposed wiring can be used for speaker cable connection. The speaker structure that permits direct wall-mounting with screws prevents the speaker from falling easily even if an outward force is applied to. The input impedance can be easily changed by changing the tap position of the transformer. Two built-in 6-inch double cone speaker units deliver high quality sound. The push-in type input connector makes cable connections easy and allows bridge wiring. BS-678T have a built-in attenuator and can be connected to a 2-wire or 3-wire system.
    48,3753,32

    Available in more than 30 days

  • TOA BS-678B WALL MOUNT SPEAKER 6W/100V-3W/70V 6” 94dB

    The BS-678B, of which cabinet is made of wood, can be installed in a vertical or horizontal orientation. Either concealed in-wall wiring or exposed wiring can be used for speaker cable connection. The speaker structure that permits direct wall-mounting with screws prevents the speaker from falling easily even if an outward force is applied to. The input impedance can be easily changed by changing the tap position of the transformer. Two built-in 6-inch double cone speaker units deliver high quality sound. The push-in type input connector makes cable connections easy and allows bridge wiring.
    39,4443,40

    Available in more than 30 days

Κύριο Μενού Πλοήγησης