TOA
-
TOA D-2000CB COBRANET INTERFACE MODULE
The D-2000CB Cobranet Interface Module is designed for use with the D-2008SP Digital Mixing Processor Unit. When mounted to the D-2008SP, it allows audio transmission between this D-2008SP and other one. Each function is set by the dedicated setting software on a PC.€892,80Available in more than 30 days
-
TOA D-2000DA1 LINE OUTPUT MODEL
The D-2000DA1 Line Output Module is designed for use with the D-2008SP Digital Mixing Processor Unit and features high quality sound. The output level of each output terminal can be independently set to either +4 dB or -10 dB and its output mode independently set to either balanced or unbalanced type by the built-in DIP switch. It employs XLR type connectors.€632,40TOA D-2000DA1 LINE OUTPUT MODEL
€632,40Available in more than 30 days
-
TOA D-2000AD1 MIC/LINE INPUT MODULE
The D-2000AD1 is a 4-channel Microphone/Line Input Module designed for use with the D-2008SP Digital Mixing Processor Unit. It employs XLR type connectors.€657,20Available in more than 30 days
-
TOA D-2012C REMOTE CONSOLE UNIT
The D-2012C is a 6U rack mountable Remote Console Unit designed for exclusive use with the D-2008SP Digital Mixing Processor Unit. Assigned to any desired channels inside the D-2008SP by the dedicated software, the D-2012C’s 12 motorized faders and 8 rotary encoders can remotely adjust their volumes. Desired preset memories can be recalled using 8 function keys. It is equipped with 1 channel line input (stereo), which allows the audio signal to be transmitted to the D-2008SP via monitor bus. Audio signals inside the D-2008SP can be monitored via monitor bus through headphones connected to a stereo headphone output. The D-2012C can be installed on a desk with the additional use of an optional D-2012AS Console Case.€5.580,00TOA D-2012C REMOTE CONSOLE UNIT
€5.580,00Available in more than 30 days
-
TOA D-2008SP DIGITAL MIXING PROCESSOR UNIT
The D-2008SP Digital Mixing Processor Unit is designed to have up to 32 audio inputs and outputs in total, and to be mounted in an EIA standard equipment rack (3U size). A built-in powerful signal processing function permits the unit to be used as both a mixer and a signal processor. Its audio input/output and control ports can accept optional plug-in modules, making the unit have a maximum of 32 inputs or 32 outputs and up to 2 control modules. Using the following optional modules enables the unit to perform their functions: Two D-983s for providing a maximum of 48 contact inputs and 32 contact outputs, D-984VC for VCA control, and D-2000CB for audio data transfer between multiple D-2008SP units. Each function is set by the dedicated setting software on a PC. Setting contents can be stored in the unit’s internal memory as preset memory, which can be recalled by the D-2008SP without using a PC. The D-2012C, when connected, remotely controls the D-2008SP’s basic operations such as volume control.€6.200,00Available in more than 30 days
-
TOA BS-678BT WALL MOUNT SPEAKER 6W/100V-3W/70V 6” 94dB
The BS-678BT, of which cabinet is made of wood, can be installed in a vertical or horizontal orientation. Either concealed in-wall wiring or exposed wiring can be used for speaker cable connection. The speaker structure that permits direct wall-mounting with screws prevents the speaker from falling easily even if an outward force is applied to. The input impedance can be easily changed by changing the tap position of the transformer. Two built-in 6-inch double cone speaker units deliver high quality sound. The push-in type input connector makes cable connections easy and allows bridge wiring. BS-678BT have a built-in attenuator and can be connected to a 2-wire or 3-wire system.€48,37€53,32Available in more than 30 days
-
TOA BS-678T WALL MOUNT SPEAKER 6W/100V-3W/70V 6” 94dB
The BS-678T, of which cabinet is made of wood, can be installed in a vertical or horizontal orientation. Either concealed in-wall wiring or exposed wiring can be used for speaker cable connection. The speaker structure that permits direct wall-mounting with screws prevents the speaker from falling easily even if an outward force is applied to. The input impedance can be easily changed by changing the tap position of the transformer. Two built-in 6-inch double cone speaker units deliver high quality sound. The push-in type input connector makes cable connections easy and allows bridge wiring. BS-678T have a built-in attenuator and can be connected to a 2-wire or 3-wire system.€48,37€53,32Available in more than 30 days
-
TOA BS-678B WALL MOUNT SPEAKER 6W/100V-3W/70V 6” 94dB
The BS-678B, of which cabinet is made of wood, can be installed in a vertical or horizontal orientation. Either concealed in-wall wiring or exposed wiring can be used for speaker cable connection. The speaker structure that permits direct wall-mounting with screws prevents the speaker from falling easily even if an outward force is applied to. The input impedance can be easily changed by changing the tap position of the transformer. Two built-in 6-inch double cone speaker units deliver high quality sound. The push-in type input connector makes cable connections easy and allows bridge wiring.€39,44€43,40Available in more than 30 days
-
-
TOA TU-651 HORN DRIVER 50W 16Ω 110dB IP65
The TU-651 is a highly intelligible driver unit suited to public address announcement applications. Use the driver unit in combination with a suitable horn (optional). Its powder-coated finish and stainless steel screws ensure the unit’s weatherproof capability.€45,11€49,60TOA TU-651 HORN DRIVER 50W 16Ω 110dB IP65
€45,11€49,60Available in 1-3 days
-
€51,76
€57,04TOA TU-631M HORN DRIVER 30W 70V/100V 110dB IP65
€51,76€57,04Available in more than 30 days
-
TOA TU-651M HORN DRIVER 50W 70V/100V 110dB IP65
TOA’s TU-651M is a highly intelligible driver unit suited to public address announcement applications. Use the driver unit in combination with a suitable horn (optional). Its powder-coated finish and stainless steel screws ensure the unit’s weatherproof capability.€60,71€66,96TOA TU-651M HORN DRIVER 50W 70V/100V 110dB IP65
€60,71€66,96Available in 1-3 days
-
TOA RM-320MF FIREMANS MICROPHONE EXTENSION
The RM-320F is an extension unit for increasing the number of function keys of RM-300MFRemote Microphones.€249,71€409,20TOA RM-320MF FIREMANS MICROPHONE EXTENSION
€249,71€409,20Available in 1-3 days
-
TOA RM-300MF FIREMANS MICROPHONE
he RM-300MF Fireman’s Microphone is designed for exclusive use with the VM-3000 Series. It is equipped with an emergency activation key, permitting pre-recorded evacuation and alert announcements to be activated, and microphone announcement to be made in emergency situations. By connecting the RM-320F Fireman’s Microphone Extension to the RM-300MF, the number of function keys can be expanded. The zone selection or failure acknowledgment function can be assigned to such function keys.€736,99€818,40TOA RM-300MF FIREMANS MICROPHONE
€736,99€818,40Available in more than 30 days
-
TOA VM-3360E EXTENTION AMPLIFIER 360W FOR VM-3000
The VM-3360E is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with the speaker output section which has an internal attenuator and 5-output selector. In addition, the unit features the surveillance function which automatically checks the system for failures.€2.666,00Available in more than 30 days
-
TOA VM-3240E EXTENTION AMPLIFIER 240W FOR VM-3000
The VM-3240E is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with the speaker output section which has an internal attenuator and 5-output selector. In addition, the unit features the surveillance function which automatically checks the system for failures.€1.984,00Available in 1-3 days
-
TOA VM-3240VA MIXER AMPLIFIER 5 INPUTS 240W/100V 6 ZONES
The VM-3240VA is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with audio inputs including the background music input, and the speaker output section which has an internal attenuator and 5-output selector. It permits not only general-purpose broadcast, but also Emergency Broadcast based on the EN60849 Standard which gives pre-recorded voice instructions in the emergency situation. Broadcast can be made from an optional RM-300MF Remote Microphone as well as from the amplifier, and can be remotely controlled from external equipment. In addition, the unit features the surveillance function which automatically checks the system for failures.€2.542,00Available in more than 30 days
-
TOA VM-3360VA MIXER AMPLIFIER 5 INPUTS 360W/100V 6 ZONES
The VM-3360VA is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with audio inputs including the background music input, and the speaker output section which has an internal attenuator and 5-output selector. It permits not only general-purpose broadcast, but also Emergency Broadcast based on the EN60849 Standard which gives pre-recorded voice instructions in the emergency situation. Broadcast can be made from an optional RM-300MF Remote Microphone as well as from the amplifier, and can be remotely controlled from external equipment. In addition, the unit features the surveillance function which automatically checks the system for failures.€2.976,00Available in more than 30 days
-
TOA RM-200SF FIREMAN’S MICROPHONE
The RM-200SF is a Fireman’s Microphone of the matrix system. It is equipped with an Emergency key,permitting it to be used as a remote microphone for emergency broadcast. Zone selection and microphoneannouncement can be made at the time of emergency broadcast. It offers a surveillance function todetect failures including microphone element failure. The RM-200SF has three function keys that can beset as individual or group selection keys, and each key is linked with the corresponding two indicators.Connecting the optional RM-210, RM-320F Extension units to the RM-200SF expands the number offunction keys and indicators in blocks of ten.€1.984,00TOA RM-200SF FIREMAN’S MICROPHONE
€1.984,00Available in more than 30 days
-
TOA SC-651 HORN SPEAKER 50W
TOA’s SC-651 is a compact, highly intelligible speaker suited to public address announcement applications. Its external speaker component finished with powder coating, and stainless steel screws ensure the unit’s weatherproof capability.€140,00€155,00TOA SC-651 HORN SPEAKER 50W
€140,00€155,00Available in more than 30 days
-
TOA PC-658R CEILING SPEAKER 6W 6” 100V 90dB
Integrated with a resin panel and speaker frame, the PC-658R is the ceiling mount speaker with a metal attached. It features spring clamp mechanism for easy speaker mounting to the ceiling. The input impedance can be easily changed by changing the tap position of the transformer.Rated Input 6 W (100 V line), 3 W (70 V line)
Rated Impedance 100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 10 kΩ (1 W)
70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 10 kΩ (0.5 W)
Sensitivity 90 dB (1 W, 1 m) (500 – 5,000 Hz, pink noise)
Frequency Response 65 – 18,000 Hz (peak -20 dB)
Speaker Component 16 cm (6″) cone-type
Dimensions for Fixing Hole Mounting hole: φ170±5 mm (φ6.69″±0.2″)
Ceiling thickness: 5 – 25 mm (0.2″ – 0.98″)
Speaker Mounting Method Spring clamp
Finish Baffle: Polypropylene resin, off-white (RAL 9010 or equivalent color)
Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color),
paint
Dimensions φ192 x 73 (D) mm (φ7.56″ x 2.87″)
Weight 500 g (1.1 lb)€21,32€23,56TOA PC-658R CEILING SPEAKER 6W 6” 100V 90dB
€21,32€23,56Available in more than 30 days
-
TOA PC-648R CEILING SPEAKER 6W 5” 100V 90dB
Integrated with a resin panel and speaker frame, the PC-648R is the ceiling mount speaker with a metal attached. It features spring clamp mechanism for easy speaker mounting to the ceiling. The input impedance can be easily changed by changing the tap position of the transformer.Rated Input: 6 W (100 V line), 3 W (70 V line)
Rated Impedance: 100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 10 kΩ (1 W)
70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 10 kΩ (0.5 W)
Sensitivity: 90 dB (1 W, 1 m) (500 – 5,000 Hz, pink noise)
Frequency Response: 100 – 18,000 Hz (peak -20 dB)
Speaker Component: 12 cm (5″) cone-type
Dimensions for Fixing Hole Mounting hole: φ145±5 mm (φ5.71″±0.2″)
Ceiling thickness: 5 – 25 mm (0.2″ – 0.98″)
Speaker Mounting Method Spring clamp
Finish Baffle: Polypropylene resin, off-white (RAL 9010 or equivalent color)
Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color),
paint
Dimensions φ168 x 77 (D) mm (φ6.61″ x 3.03″)
Weight 470 g (1.04 lb)€19,07€21,08TOA PC-648R CEILING SPEAKER 6W 5” 100V 90dB
€19,07€21,08Available in 1-3 days
-
TOA ER-3215 HAND GRIP TYPE MEGAPHONE R14P(C) 6(9V DC) 15W-23W
The ER-3215 is an easy-to-operate, hand grip type 15 W megaphone with a removable microphone. It can be used as a shoulder-type megaphone when the microphone is detached. Handle and microphone with anti-bacteria treatment improve hygiene and safety during use. The newly developed polyimide diaphragm is employed to ensure high sound qualityPower Source R14P (C) – 6 (9 V DC)
Rated Output 15 W
Maximum Output 23 W
Battery Life Approx. 9 hours (JEITA)*
Audible Range Approx. 400 m (JEITA)*
Diaphragm Polyimide film (voice coil, bobbin)
Anti-bacteria Treatment Mouth and handle
Operating Temperature -10° to +40°
Finish Horn: ABS resin, light gray
Mouth, battery case and handle: ABS resin, gray
Strap: Nylon, black
Dimensions 210 (W) x 291 (H) x 381 (D) mm (when attaching the microphone)
Weight Body: 1.15 kg (without batteries and microphone)
Microphone: 150 g€98,47€109,12Available in more than 30 days
-
TOA ER-2930W HAND GRIP TYPE MEGAPHONE R20P(D)x 10(15VDC) 30-45W
The ER-2930W is a shoulder megaphone having facilities of EXT. mic input, an AUX input, a DC power input, a battery meter whistle sound. It can be mounted to the optional ST-16 speaker stand. Handle and microphone with anti-bacteria treatment improve hygiene and safety during use. Its microphone assembly are given germ-resistant treatment. The newly developed polyimide diaphragm is employed to ensure high sound quality.Power Source Battery: R20P (D) – 10 (15 V DC)
External Power: 12 V DC Battery
Rated Output 30 W
Maximum Output 45 W
Signal Sound Whistle (1,600 to 2,400 Hz)
Battery Life Voice: Approx. 17 hours (JEITA (*2)), Whistle: Approx. 90 min. (JEITA (*2))
Audible Range Voice: Approx. 800 m (JEITA (*2)), Whistle: Approx. 1000 m (JEITA (*2))
AUX Input Sensitivity -10 dB (*1) (300 mV), 10 kΩ (φ3.5 mini jack, stereo plug acceptable) ,
volume control
EXT. Mic Input 600 Ω, unbalanced, %%c6.3 phone jack, volume control
Receiving Frequency UHF (800 MHz Band), VHF (200 MHz Band)
Antenna Fold-down flexible antenna
Diaphragm Polyimide film (voice coil, bobbin)
Anti-bacteria Treatment Microphone
Remaining Battery Indication LED (also serves as a power indicator)
Steady ON: Normal use, Flashing: Batteries need replacement
Operating Temperature -10° to +40°
Finish Horn ring: Vinyl chloride, gray
Horn: Aluminum, light gray, paint
Case top: Die-cast aluminum, gray, paint
Strap: Nylon, black, Others: ABS resin, gray
Dimensions %%c 351 – 512 mm
Weight 3.8 kg (without batteries) , Microphone: 150 g€336,00€372,00Available in more than 30 days
